zx6r wiring to kill switch

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

does any one know how to wire an ignition switch to the kill switch so that i can power up and power off using the kill switch, i know i need to put a 100oms resister with 1% tolerance inline on the gray wire from the ignition switch. its just know what wire to connect to what wire a step by step guide would be well handy HELP
____________________
Im crap at wiring

hmmmnz · Super Spammer Joined: 22 Aug 2006 Karma :

so are you getting rid of your key is that what your saying??
why the resistor?? is there some sort of security thing on the bike? normally the key ignition acts as a normal switch
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

thats right im getting rid of the ignition and i want to be able to start and stop the bike using the kill switch, the resister is a securaty the thing inbuilt into the ignition switch to stop hotwiring
____________________
Im crap at wiring

hmmmnz · Super Spammer Joined: 22 Aug 2006 Karma :

have you got a picture of the wiring diagram??
if so send it to me and ill alter it to run through the switch.
ill see if i can find one online.
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi
mate, no i dont have one one my computer, and im not just crap with wiring im also crap with computers too, that would be absolutley brilliant if you could do that
Cheers
It took me two days to work out how to get onto this forum
____________________
Im crap at wiring

finpos · World Chat Champion Joined: 13 Sep 2005 Karma :

Depends what you are trying to do - you might have to replace the ignition switch with some other kind of switch, otherwise the bike may go into a state where the electrics are powered up but the engine is disabled (by the kill switch). In such a state, the battery would go flat.

If you're making a track bike or something, that could be as simple as disconnecting the battery when you are not using it.

finpos.

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi
there here is the wiring diagram i think this is all you need

i hope it works

https://www.bikechatforums.com/download.php?id=40132
____________________
Im crap at wiring

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

ops wrong one
____________________
Im crap at wiring

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi finpos
yes i know what you mean iv spoke to a few people and and thay have seen it done on zx6r before the power up and power off riged up to the kill switch. to be honest i think im out of my depth with all this wiring lark i thought i might be able to do it if i had a step by step guide on how to do it. im now thinking i might have to get someone to modify the loom for me ie sorting the kill switch problem and take out all the wiring not required ie the clutch switch, kick stand switch and all the other wiring not needed like the lighting,
____________________
Im crap at wiring

hmmmnz · Super Spammer Joined: 22 Aug 2006 Karma :

i was gunna say Very Happy

vfr400, mmm
what year zx6r do you have??
i found an early zx6 manual, but i doubt its the same,
do you have a haynes manual that you can scan a pic in??
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi there
the year of the zx6r is a 1999 G2 model and i do have the mamual with the wiring diagram but i dont have a scanner but one of me mates will, ill go and get it scanned and i,ll have it on here tonight, once again thanks verry much for your help ide be scuppered otherwise.
____________________
Im crap at wiring

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi hmmmnz
Hope this works im having a bit of trouble adding this attachment but here goes.

no i can't sent it, i have it here on desk top but cant get it onto this form for some reason when it gives me the option to add attachment it looks like it is going to work but does not show up on the forum.

Been trying to send this all night but no joy i can send it vie emailif that's any use.
____________________
Im crap at wiring

hmmmnz · Super Spammer Joined: 22 Aug 2006 Karma :

ok send it to me
hmmmnz@hotmail.co.uk
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

robbo0464 · Derestricted Danger Joined: 23 Nov 2006 Karma :

Hi
I dont supposs you've had a chance to hav a look at the wiring diagram did you. [/img]
____________________
Im crap at wiring