Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


DIY tyre change, simple or not?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

bridgedino
Spanner Monkey



Joined: 22 Oct 2012
Karma :

PostPosted: 14:17 - 28 May 2013    Post subject: DIY tyre change, simple or not? Reply with quote

Will shortly be looking at replacing my rear tyre on my CRF250L. It's a knobbly dual sport tyre on a spoked wheel with inner tube, very much like a large bicycle tyre

So my question is...is it basically like changing a bicycle tyre? Wheel off, couple of tyre levers, tube out, tyre off the fit new, ride off Very Happy

Anyone have any experience?

Cheers
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

mudcow007
World Chat Champion



Joined: 01 Feb 2012
Karma :

PostPosted: 14:23 - 28 May 2013    Post subject: Reply with quote

i did my CG tyres my self

i dunno if you have inner tubes, i did an got a pinch puncture. i repaired that aswell

yeah its basically the same as a bicycle tyre

i didn't have any soap for the tyres so squirted everything with wd40 to make the tyres slip on/ off the rims easier, just remember to wash it with washing up liquid afterwards
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 14:28 - 28 May 2013    Post subject: Reply with quote

Yeah, be nice and easy on that Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

.....
Quote Me Happy



Joined: 15 Jan 2005
Karma :

PostPosted: 14:31 - 28 May 2013    Post subject: Reply with quote

Get some decent levers like these Buzzettis

https://www.xrv.org.uk/forums/attachments/wheels-tyres-tubes/13602d1308778078-recommend-me-some-tyre-levers-9074e-4969.jpg.jpg

They have a lip on them to stop you pinching the tube.

If you're having to use a lot of force stop and think and try a smarter way.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 15:00 - 28 May 2013    Post subject: Reply with quote

Tyres on such a bike as the 250L are easy.Just take your time.But using WD40 is not a good idea as it contains chemicals which think affect the rubber.If you get it all over the inside of the rims,when it evaporates it leaves a sticky substance.this could cause the tyre to creep on the rim and pull the valve stem out of the inner tube at any time.Believe me,I have had it happen to me after a shop did not fit a new inner tube correctly.

Tubeless tyres are just as easy except breaking the bead over the safety bump

https://i666.photobucket.com/albums/vv23/WiNot_Rhencullen/Workshop/2013-05-05184720_zpsd28e1d3d.jpg

This was the Sunday just before the Mayday Run the next day so I had to bash on with it myself Smile
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 15:51 - 28 May 2013    Post subject: Reply with quote

It's all about technique but it's pretty easy to do. As already said, If you find yourself struggling then change technique. Don't use WD40 on the bead though, use dilute washing up liquid.
 Back to top
View user's profile Send private message You must be logged in to rate posts

BTTD
World Chat Champion



Joined: 22 Nov 2012
Karma :

PostPosted: 16:17 - 28 May 2013    Post subject: Reply with quote

Lots of youtube videos - watch several so you've got different techniques to try out.
Did my first tyre change a few months ago and it was pretty straight forward, will be easier next time.
I used buzzeti levers as mentioned above and soapy water.
Bear in mind that warm rubber is more pliable, something that occurred to me while I was mounting my new tyres in the freezing garage - I could've kept the new tyres in the warm house until they were ready to go on.
 Back to top
View user's profile Send private message You must be logged in to rate posts

The Shaggy D.A.
Super Spammer



Joined: 12 Sep 2008
Karma :

PostPosted: 16:26 - 28 May 2013    Post subject: Reply with quote

mudcow007 wrote:
i didn't have any soap for the tyres so squirted everything with wd40 to make the tyres slip on/ off the rims easier, just remember to wash it with washing up liquid afterwards


Or just use the washing up liquid in the first place.
____________________
Chances are quite high you are not in my Monkeysphere, and I don't care about you. Don't take it personally.
Currently : Royal Enfield 350 Meteor
Previously : CB100N > CB250RS > XJ900F > GT550 > GPZ750R/1000RX > AJS M16 > R100RT > Bullet 500 > CB500 > LS650P > Bullet Electra X & YBR125 > Bullet 350 "Superstar" & YBR125 Custom > Royal Enfield Classic 500 Despatch Limited Edition (28 of 200) & CB Two-Fifty Nighthawk > ER5
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ariel Badger
Super Spammer



Joined: 02 Dec 2006
Karma :

PostPosted: 16:54 - 28 May 2013    Post subject: Reply with quote

Changing road tyres is easy, changing MX tyres is not as they are so stiff and it is worse if you use rim-locks. When I have done it in the past I have found that blood makes a decent lube.
____________________
Bikers make great organ donors, get 115 on your licence today.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 17:31 - 28 May 2013    Post subject: Reply with quote

I have a neat little thingy that goes through the valve hole and screws into the valve with the core removed to pull it through the hole once you have the first bead fitted.

Saves LOTS of swearing and skinned knuckles.
https://www.adventure-spec.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/n/e/neri-01-july-12-1-33.jpg

Liberally applied ordinary household soap is best for lubing the bead. Washing up liquid can go too far and leaves a possability of the tyre rotating on the rim during use (something which rips the valve out and causes an instant deflation).

Remember to check the bead is fully seated. I had to bang the rear on the enfield up to 90psi three times with the valve core out to get it fully seated last time. Tubeless tyres usually have a line marked near the bead which should be the same distance from the rim all the way round.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

yen_powell
World Chat Champion



Joined: 22 Jun 2008
Karma :

PostPosted: 17:48 - 28 May 2013    Post subject: Reply with quote

I always put the tube (slightly inflated) into the tyre before the wheel goes near it, then pull the valve through the hole in the wheel and put the lock nut on a few turns before starting to fit it.
____________________
Blackmail is a nasty word........but not as nasty as phlegm!
XT1200Z and a DR350 in bits
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 18:10 - 28 May 2013    Post subject: Reply with quote

stinkwheel wrote:
I have a neat little thingy that goes through the valve hole and screws into the valve with the core removed to pull it through the hole once you have the first bead fitted.

Saves LOTS of swearing and skinned knuckles.
https://www.adventure-spec.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/n/e/neri-01-july-12-1-33.jpg


Where the fuck was that when I had a bike with tubed tyres! Laughing
 Back to top
View user's profile Send private message You must be logged in to rate posts

evoboy
World Chat Champion



Joined: 20 Aug 2009
Karma :

PostPosted: 20:09 - 28 May 2013    Post subject: Reply with quote

Race tyres for road bikes are by far the easiest to fit. Dont even need levers! Laughing

Mx tyres can be a right swine to do.
____________________
Suzuki GT250 x7------- Fazer 600------CB250RS------Aprilia Rally 70----- Bandit 600

APT Motorcycles
 Back to top
View user's profile Send private message You must be logged in to rate posts

neatbik
World Chat Champion



Joined: 27 Jun 2007
Karma :

PostPosted: 20:17 - 28 May 2013    Post subject: Reply with quote

evoboy wrote:
Race tyres for road bikes are by far the easiest to fit. Dont even need levers! Laughing


My favourites are supercorsa's and Racetecs, still warm from the ride over to me - They practically fall off the rim.
Laughing

MX tyres with rimlocks are the devils spawn.
But i'm getting pretty good at them now, after lots of skinned knuckles.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bridgedino
Spanner Monkey



Joined: 22 Oct 2012
Karma :

PostPosted: 20:34 - 28 May 2013    Post subject: Reply with quote

Thanks for all the info
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

cb1rocket
World Chat Champion



Joined: 30 Jan 2010
Karma :

PostPosted: 22:34 - 28 May 2013    Post subject: Reply with quote

I too have used WD-40, yes I know I shouldn't but then I don't like washing up liquid as it contains salt that eats through the chrome and rim!

What house hold soap would you use? Is there any specific ones to go for?
____________________
Honda H100S2 Rebuild - https://www.bikechatforums.com/viewtopic.php?t=253852
 Back to top
View user's profile Send private message You must be logged in to rate posts

Supermotard37...
Scooby Slapper



Joined: 31 May 2011
Karma :

PostPosted: 02:31 - 29 May 2013    Post subject: Reply with quote

I used this guys tactics many times to change tyres on my supermoto Razz hope this helps!



https://www.youtube.com/watch?v=UPaCV_uCi78
____________________
Fuck off..!! "You absolute contraception malfunction"
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 09:12 - 29 May 2013    Post subject: Reply with quote

cb1rocket wrote:
What house hold soap would you use? Is there any specific ones to go for?


Any. I use ordinary green household soap.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 158 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 0.38 - MySQL Queries: 16 - Page Size: 103.08 Kb