TZR 250 main bearings

oldbiker · Nitrous Nuisance Joined: 15 Nov 2009 Karma :

Can anyone on this site identify a type of bearing puller that will definitely remove the two external main bearings from a tzr250 crankshaft.

The bearings are very close to the faces of the crank webs and it is near impossible to fit bearing knives behind the bearings.

There is not enough space to get the usual 2 or 3 leg puller in either.

The bearings do have a groove that accepts a C ring for location in the engine case.

Any help would be apreciated,
____________________
It`s all powerfull white mans magic
https://i897.photobucket.com/albums/ac178/tzrsteve/album%201/035.jpg

Blau Zedong · Banned Joined: 26 Jun 2006 Karma :

Use a cold chisel or ball joint splitter at 120 degree intervals. Sorted.
____________________
18:54:48 Rob Fzs: jews don't give away stuff for free

18:54:59 Rob Fzs: unless its their clothes/ hair/ golden teeth

oldbiker · Nitrous Nuisance Joined: 15 Nov 2009 Karma :

Any one got any other recomendations for a type of bearing puller that will do this job??
____________________
It`s all powerfull white mans magic
https://i897.photobucket.com/albums/ac178/tzrsteve/album%201/035.jpg