super awesome turbo now in bits again

[CHR15]

page 100. get.



https://i939.photobucket.com/albums/ad233/chris-bracey/lastpostwins/1290376193044Medium.jpg

[speedy]

https://www.brenhamyamaha.com/images/KorryIndy-dragracing2.jpg

front wheel is actually the back wheel in drag racing
whats normally the front wheel becomes cushioning for when you're holding the front brakes, not slowing down and crash into a wall
looks cool though man must be awesome having tools and mechanical knowledge at your disposal cant wait to see this thing run

[Wafer_Thin_Ham]

[chris-red]

[quote="Wafer_Thin_Ham"]

[Nobby the Bastard]

Ditto. Provided that the typical plasterer's radio typically has a mouth full of plaster....
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050

[CHR15]

flange.

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xaf1/t31.0-8/1913467_10152117401933365_3782085217335344201_o.jpg
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[krarkol]

[CHR15]

wategate

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/t1.0-9/10330375_10152119023238365_14580752572114143_n.jpg

internal flange

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xfp1/t1.0-9/10426758_10152119023303365_7851891888699597093_n.jpg
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Whosthedaddy]

Damn good looking!
____________________
Current : MSX 125 Past : CBR 900RR Monkeybike : c50 LAC : ZXR750 H2 : FZR600 : ZX7R P3 : YW100 : TRX850: Trophy 900 T309 : GSXR 600 L0: Monkeybike : XJ6S Whosthedaddy

[CHR15]

another bit i did tonight.

the rear sprocket is roughly 8mm too far outboard, however the wheel is central.

i cant take that much out the sprocket carrier, so i'll make an offset front sprocket to move the front out instead.

tool:

https://scontent-b-lhr.xx.fbcdn.net/hphotos-xfp1/t1.0-9/10417646_10152119257228365_4032123938963973578_n.jpg

like so:

https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpf1/t31.0-8/10287035_10152119257208365_8987692000012615252_o.jpg

wizz wizz wizz

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/t1.0-9/10300642_10152119257238365_9214007136930387849_n.jpg

done

need to dig out an output shaft and make a welding jig.
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Pete.]

Ooh, hard-turning
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good

[CHR15]

its not often your swarf catches fire lol.

credit to sandvik inserts though still looks like new and it was a renthal sprocket not a cheese one.
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[i.p.phrealy]

[CHR15]

welded as little thing onto the wastegate to stop the gas burning the engine paint.

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10380051_10152122742268365_8509056437446702932_o.jpg


getting the hang of this metal gluing business

https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-xfa1/t1.0-9/10364122_10152122742278365_6457387287440724445_n.jpg



then machined the plenum front plate which fits onto the tb's

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xfa1/t31.0-8/10258815_10152122742273365_1931511295716270463_o.jpg

https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpf1/t1.0-9/10406744_10152123050473365_8532491282044727800_n.jpg


started forming the other sides and welding them on

https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-xpf1/t31.0-8/10257974_10152123050483365_2669718028008812251_o.jpg


and in place

https://scontent-b-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/1498003_10152123050488365_2127577458346309287_o.jpg

the plenum and throttle bodies will be pulled into the head with 2 tie rods on each side which will anchor on the head.
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Fladdem]

[CHR15]

probably walked past you lol.

were were right down the far end of the pit garages by the entry to the pit lane.
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Fladdem]

We were in the middle, about halfway up the pit lane.

What do you race?
____________________
Current:1991 Honda MT50 (Soon to be a H100/MTX/MT5 hybrid), 1976 Honda Cub C70, 2005 Honda Varadero 125, 1993 Yamaha TTR250 Open Enduro , 2010 Road Legal Stomp YX140, 1994 Honda CRM 250 MK III, 1999 Cagiva Mito 125, 1992 Honda CB400 Super Four, Stomp T4 230, 1984 Honda H100s, 2009 Sym XS125K
Past:2003 Aprilia RS125, 1982 Kawasaki GPZ550(FREE BIKE!)
I'm having more fun than a well-oiled midget.

[CHR15]

gsxr 1000 powered open wheel single seater
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Fladdem]

Is that bikesports class?

Sounds more interesting than Toyota MR2's.
____________________
Current:1991 Honda MT50 (Soon to be a H100/MTX/MT5 hybrid), 1976 Honda Cub C70, 2005 Honda Varadero 125, 1993 Yamaha TTR250 Open Enduro , 2010 Road Legal Stomp YX140, 1994 Honda CRM 250 MK III, 1999 Cagiva Mito 125, 1992 Honda CB400 Super Four, Stomp T4 230, 1984 Honda H100s, 2009 Sym XS125K
Past:2003 Aprilia RS125, 1982 Kawasaki GPZ550(FREE BIKE!)
I'm having more fun than a well-oiled midget.

[krarkol]

Have you ever had a go in the single seater you've built? Or is it only the contracted driver that gets the honour?
____________________
Bandit 600 - deaded

[CHR15]

i didn't build it, i just look after it at track.

yes i've driven one. there quick, but not that quick. they top out at just over 130.
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[krarkol]

Would I be allowed a go in one on such a course? I hold a driving licence
____________________
Bandit 600 - deaded

[CHR15]

billet ignition cover / scavenge pump

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/10264175_10152127665928365_8799052965278206272_o.jpg
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[CHR15]

bit more on the pressure piping

https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10339541_10152154571428365_8008568063700392944_o.jpg


winds up through where the shock would have gone and into the bottom of the plenum

https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-xpa1/t31.0-8/10003644_10152154571423365_7039555962514094068_o.jpg



this sounded like a good idea in my head.. not sure if its mint or gash.

https://scontent-a-lhr.xx.fbcdn.net/hphotos-xpa1/t31.0-8/1907799_10152154571413365_8300547337306948148_o.jpg
____________________
Turbocharged drag thing / project death weapon / GK73A
Ste: I'm not entirely sure how you'd go about verbally abusing someone with a potato but I'm sure it's possible.

[Pete.]

Nice bit of oval tubing

I know it's not oval now - but it's gonna be
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good