Clutch

[Wilson12345]

Clutch on the YBR 125 just started slipping when I rag the shit out of it, is there any other procedure other than take it easy/ride it out till it goes completely?

Bike has 12k miles all done by myself

Anyone know how much it's going to set me back when it goes completely?
____________________
Seem to not have enough karma to post :l

[N cee thirty]

ermm well dek ya go round fat tonys yeh?!

thn pay hm 50 dolla n he'll sort it yeh man
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30 Mod 2 Passed 09/06/2011

Jewlio Iglesias wrote: I actually did vote BNP once

[andym]

[wanders in]...
about 27 quid if it's just the plates.... although I ain't got a clue about anything man
[saunters back out again]

[Ichy]

Only other thing is to make sure the cable is adjusted correctly and that the clutch return arm is moving OK.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/

[swanny]

can get the plates from either Paul Smeatons BItz for Bikes or from Wemoto.. if your not sure how to do it yourself might be looking around an hours to hour and half ( most garages will try and milk for that bit extra)..

Prob looking around 80-100 quid for a garage, if you reckon you can do them yourself get a haynes and have a go. all you have to do is basically strip them out, check them, soak some new ones in oil overnight and then replace the exact same way they came out.. (OB bit more to it)...
____________________
M SWANNY.. see a sig !

[Frost]

Willing to bet quite heavily that the plates are fine, the cable just needs adjusting on the handlebar.