Name That Caliper

[RFT]

Long time, no post...

My father in law has bought my son an old offroad go kart which, it turns out, has binding brakes. Being an ebay purchase, there's no documentation whatsoever.

We've already had the Caliper off, given it some grease, out the whole tug back together to no avail, so I guess it needs replacing or a proper rebuild. However we don't know the part number of the caliper. The part numbers on the pads are no help, seemingly referring to parts off a bigger brake (TT2450GG)

So, after a days fruitless googling, I turn to the BCF hive mind. Does anyone recognise this calliper?

https://farm8.staticflickr.com/7115/7615847640_904e6be0d8_z.jpg

https://farm8.staticflickr.com/7260/7615874856_715deae54d_z.jpg

It's single pot, and the pads are retained by a single pin at the top, and springs at the bottom. Manufactured by Nissin, obviously.

Only other marks on it are "88" in a circle with "3" underneath it (build date perhaps?) which are part of the casting and "8c5" stamped into it.

https://farm9.staticflickr.com/8010/7615916094_9d2226511a_z.jpg

https://farm9.staticflickr.com/8027/7615962300_d2d92f6cbc_z.jpg

[_Iain_]

Gary

Couldnt you run the serial number on the brake pads through wemoto/ebay or whatever and find out what bike theyre off of that way?
____________________
Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340

[Robby]

Looks like a CBR600 rear caliper to me.

https://www.ebay.co.uk/itm/Honda-CBR600FSi-Rear-Brake-Caliper-CBR600-Rossi-Rep-CBR-/370336443981#ht_1142wt_932

[sidewinder]

PAD, FR. (TT2450GG)
CPC1573816
(45105-MT8-008)
PAD, FR. (TT2450GG)

$26.55 (USD)

Part Category:

REAR BRAKE CALIPER

On Vehicle Models:

Honda GL1500, Honda GL1500A, Honda GL1500I, Honda GL1500SE
Product reviews

MODELS 1990-92

Hope this helps
____________________
"Nitrous is like a cheap hooker, you want to hit it but are scared of the consequences

[salty21]

that looks to be the same caliper as i have had on both my 600rr's and the SP-1. I think they use it on a lot of honda's
____________________
04 NSR 125(sold) ---- 03 CBR 600rr(sold) ----90 pan euro ST1100 '' ----02 CG 125
94 CB400 Super Four ---- 2000 VTR SP1 (sold) ---- 08 ninja p8f(sold, meh) ----05 CBR600rr

[RFT]

[neatbik]

Yep, its definatley from a vtr/cbr.
Honda use it on quite a few of their bikes.

[neatbik]

Double post.

[salty21]

just been looking through some old pics of my bikes and the caliper you have seems to be a little different, the bleed nipple and banjo are the other way round on both my bikes. i dont think it will matter too much though as the body itself seems to be identical

https://www.bikechatforums.com/download.php?id=84932
____________________
04 NSR 125(sold) ---- 03 CBR 600rr(sold) ----90 pan euro ST1100 '' ----02 CG 125
94 CB400 Super Four ---- 2000 VTR SP1 (sold) ---- 08 ninja p8f(sold, meh) ----05 CBR600rr

[DrDonnyBrago]

That is the same as the rear caliper on my CBR6f - banjo/bleed nipples in the correct place too.