KMX125 Cyl head & P/valves

[Suntan Sid]

I've got some KMX125 power valves, they came with my project bike, they're no use to me as I don't have a KMX.
I've cleaned them up, and managed to remove the vavle seals, without damaging anything.
There is a little bit of pitting on the valve bodies, I don't think it will affect their operation.
One of the alloy, seals has a flat spot so that will need replacing. Obviously you'll need to replace any rubber/plastic type seals.

https://i645.photobucket.com/albums/uu172/Troodos-Pool-Guy/Eng%20Rbld/KMX%20P%20VALVES_zpsvevrh3yw.jpg

Here are the part numbers/diagrams:-

KMX125
https://www.cmsnl.com/kawasaki-1988-a3-kmx125_model11860/partslist/E1110.html#results

I've also got a KMX125 cylinder head, includes thermostat and housing and temp sensor, not sure if the thermostat or sensor are working.
The head's in good nick, I've checked it on a sheet of glass and as far as I can see tell it's not warped.

https://i645.photobucket.com/albums/uu172/Troodos-Pool-Guy/Eng%20Rbld/KMX%20HEAD%2001_zpsunu7yple.jpg

https://i645.photobucket.com/albums/uu172/Troodos-Pool-Guy/Eng%20Rbld/KMX%20HEAD%2002_zpsckh11yi5.jpg

£40 for everything, If I have to post them, the postage will be 5 or 6 quid.
I'm in Buxton you can collect them any time, should you wish.

Having re-checked the part numbers the parts are for the 125 not the 200 model!
____________________
"Everybody needs money, that's why they call it money!"