i have just got a nrg mc3 air cooled need help!!!

[frankiew1992]

hi people i have just got a nrg mc3 air cooled i no they are crap but i can't say no for 40 quid can any one tell me how to deresrict this and if so where will i find the suff on the bike
many thanks frankie

[hmmmnz]

its just a exhaust restriction,
see the 2 tubes that come off the exhaust??
you have to cut those and weld over the hole,
also there may be a small restriction in the variator,
take the side cover off, you will see a band going between the enging and the rear wheel,
the pully at the engine end contains a washer(more like a spacer) that stops the band reaching full extension and stop it reaching full speed,
undo the pully and remove that spacer, then put it all back together,


you could also just buy a new exhaust instead of derestricting the old one,
your call, you may also need a slightly larger main jet if you get a new exhaust

have fun
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[frankiew1992]

i all ready have a viper exhaust so its just the washer i got to do if it hasnt all ready been done is there any think else i could do to make it go faster
many thanks frankie

[hmmmnz]

nah just the variator washer, may be a slightly larger main jet in the carb to compensate for the exhaust,
what the top speed at the moment on the clock
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[frankiew1992]

i have only had it since 8 ive just got to go to my local tyre shop and get a back tyre will tell u in the morning thanks for your help well appreciated
many thanks frankie

[hmmmnz]

no worries, as far as scooters go they are up there with the fastest of them, being an air cooled job, there is very little to go wrong with them,
have fun, remember track pants and motorbikes of any form is just not on
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches