My Aprilia Mx50 prooblem

[Strapstah]

Ok ive finally been able to take some pics, ive got my new street fighter light aint got a clue on how to put it on plz help. wires.

https://i17.tinypic.com/311vpty.jpg
https://i12.tinypic.com/35bgivp.jpg
https://i12.tinypic.com/312jkef.jpg
https://i17.tinypic.com/35mnsdw.jpg

now my original headlights

https://i13.tinypic.com/2zqzpdh.jpg
https://i11.tinypic.com/4h9f56s.jpg


Some pics from da damage on me bike when i crashed on saturday.

https://i11.tinypic.com/3yn00sm.jpg
https://i14.tinypic.com/2hsahcw.jpg
https://i16.tinypic.com/4dzhpcg.jpg
https://i14.tinypic.com/2vhszub.jpg
https://i10.tinypic.com/35mpbw6.jpg

my broken collar bone


https://i13.tinypic.com/30xisd0.jpg
https://i13.tinypic.com/2pplm6t.jpg

please help, thanks.
____________________
Easy FAM!

[finpos]

I just ripped one of those of my mates bike, stomped on it and threw it in the bin. hope you don't want to see where you are going in the dark.

Apart from that, and the fact that roger the bodger has already been at your bike, it should be pretty easy.

You'll have to make or buy enough brackets to actually physically mount the thing. the one I took off was mounted to two standard brackets clamped onto the forks.

Connect all the green wires together, and connect them to an earth on your bike. That would be the same place the two green wires on your existing setup go. use a proper crimp tool. alternately, twist the wires together and cover the joint in non-waterproof insulating tape.

Then all you have to do is track down the hi and lo beam wires (connected to that bell wire, i suspect) and connect those to the white and blue wires on the new thing. don't worry about which way around because it makes f**k all difference to the actual light output

Repeat for the two indicator feeds (red on the new thing, can't see on the old thing).

finpos.

[Strapstah]

thanks, whos roger da bodger ???
____________________
Easy FAM!

[finpos]

The bloke with the bell wire and the insulating tape

finpos.

[Strapstah]

lol, that was there when i got it. Hehe whats the best thing to use thats not a bodge job (for wires)
____________________
Easy FAM!

[Marci]

Bullet Connectors, Spade Connectors, or solder & heatshrink.

All available from Maplins, Halfords, and any decent automotive store.
____________________
FAB-Racing MiniMotoSidecars - Back with a vengeance - F1 Class 2011...
CBR170 engine, custom chassis - www.minimotoscene.co.uk