Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Jetforce 125cc efi

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Maikiro
L Plate Warrior



Joined: 11 Apr 2004
Karma :

PostPosted: 10:11 - 11 Apr 2004    Post subject: Jetforce 125cc efi Reply with quote

Hi all,

I hope someone can help me, does anyone have a english manual for the Peugeot Jetforce 125cc efi... mine all came in german, french and spanish but not english....

Secondly, I have been told by 2 dealers that i not need to put oil into the bike.... even thou its a 4-stroke engine.... Please can some one help.........
 Back to top
View user's profile Send private message You must be logged in to rate posts

Robby
Dirty Old Man



Joined: 16 May 2002
Karma :

PostPosted: 10:32 - 11 Apr 2004    Post subject: Reply with quote

No idea about manuals.

On 2 stroke bikes you put oil in to be burnt. In 4 stroke engines the oil goes round and round again, and gets changed every now and then.

There should be a dipstick or level window somewhere, just keep an eye on that.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Maikiro
L Plate Warrior



Joined: 11 Apr 2004
Karma :

PostPosted: 20:23 - 11 Apr 2004    Post subject: Jetforce Help Reply with quote

There is no Dipstick or anything to help with to check the oil... Peugeot are useless they dont respond to there e-mails....

Maikiro
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 22:31 - 11 Apr 2004    Post subject: Reply with quote

Hi

Common ways of setting the oil level are a dip stick, a sight glass or a bolt that you undo and then top the oil up until it comes out of the hole. If the engine is a 4 stroke then the sight glass is the most likely, followed by the dip stick.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

divuk83
World Chat Champion



Joined: 27 Nov 2003
Karma :

PostPosted: 04:01 - 12 Apr 2004    Post subject: Reply with quote

Its a 125 4 stroke engine, with some fancy fuel injection thing. It should just take 4t oil as any other bike would however I am not familiar with the bike. I would recomend that instead of contacting Peugeot directly, you go through a Peugeot bike dealer as they are usually very good. Where abouts are you near? as there is a good Peugeot dealer near me in York.

Dave
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 20 years, 17 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 1 - MySQL Queries: 17 - Page Size: 44.13 Kb