Dez25 L Plate Warrior
Joined: 15 Apr 2004 Karma :
|
|
Kickstart The Oracle
Joined: 04 Feb 2002 Karma :
|
Posted: 19:43 - 15 Apr 2004 Post subject: |
|
|
Hi
Sounds like the cable is trapped. Check the throttle is closed in the carb, and check that the cable is not catching on anything. It is possible (from memory) to put the carb slide in the wrong way round, and it will just about fit but will not close.
Also check for air leaks after the carb, especially the 2 stroke oil pipe (if plenty of work has been done to the bike then it would be easy to disturb this).
The idle speed adjuster works by changing how far down the carb slide can go. If the slide is being prevented from returning to position (from a snagged cable, etc) then the idle speed adjuster will not have any effect.
All the best
Keith ____________________ Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing |
|
Dez25 L Plate Warrior
Joined: 15 Apr 2004 Karma :
|
Posted: 00:09 - 16 Apr 2004 Post subject: |
|
|
Cheers mate!!!
I have changed the 2 stroke pipe over 2 a new one because it was stolen and the people who stole it ripped off the the 2 stroke pipe would the 2 stroke pipe just need tighting at where it enters the pump and tank??
But cheers anyways for the info i will hav 2 check all the things you have pointed out!! ____________________ Aprilia RS125 GP1 Project!! |
|