help with fitttings for exhaust

[hornetmike]

Just bought this exhaust off ebay, is this all the parts i need to fit it ? It looks like it need clips to join it up, if it does where do i get them from ?


https://i7.ebayimg.com/03/i/001/44/7c/02e4_1_sbl.JPG
____________________
87 Honda CG 125 - 97 ER5 - SR 50 -81 Z250- 96 CBR 600 F- 94 GPX600R 88- GPX 400R- 87 GS 125 - 2006 Honda CB600F- 2003 ER5 - Honda CBF 1000 2009 - Honda CBR 600 RR 2011
Current BMW R1200GS 2010

[Fisty]

It should come with them, if not you need a couple of these:- exhaust clamp . You will need a size relative to your can though.
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[hornetmike]

Cheers I see when it arrives
____________________
87 Honda CG 125 - 97 ER5 - SR 50 -81 Z250- 96 CBR 600 F- 94 GPX600R 88- GPX 400R- 87 GS 125 - 2006 Honda CB600F- 2003 ER5 - Honda CBF 1000 2009 - Honda CBR 600 RR 2011
Current BMW R1200GS 2010

[alun111]

I may be on the end of the can in that picture.
____________________
Summer: '00 Honda CB600F Hornet
Winter: '93 Suzuki GSF 400 Bandit VP Variable Valve
Past Bikes: Lifan LF100-5 Lifan LF125-A Honda C70

[hornetmike]

will i have to have carbs retuned ?
____________________
87 Honda CG 125 - 97 ER5 - SR 50 -81 Z250- 96 CBR 600 F- 94 GPX600R 88- GPX 400R- 87 GS 125 - 2006 Honda CB600F- 2003 ER5 - Honda CBF 1000 2009 - Honda CBR 600 RR 2011
Current BMW R1200GS 2010

[total_uk]

I had the same Viper cans on my VTR...didn't need any rejetting or re mapping etc. I'm not sure if it would make a difference on your bike as the only difference is I had two cans...sounded awesome..

I believe that the diameter of the pipe end is 50mm so you'd need appropriate clamps for that size