Alarm for Suzuki GZ125

[Roakusfm]

Hello friends,
I am Robert and I just registered here. I have Suzuki GZ125 Motor and I bought Beret alarm and its installed.

But it has left 2 cables to connect and I dont found where to connect. The cable that from alarm to the motor is PINK and GRAY. From the alarm, that cable is from relay switch off and on. I will attach the diagram for the alarm to see it.

If I use the alarm remote to start the motor, it can not start because the F1 light is flashing.

in the diagram,

pink cable goes to extension line next to lock
gray goes to extension line next to motor body

I hope someone will help me. Thanks!!! I will be very happy to solve it


In the alarm cable pink, I have to connect to the bike cable Black/Red and Gray cable to connect to the bike cable Black/White. And in the bike this 2 cable Black/Red and Black/White joined together. So I cut it and Black/red to pink and black/white to gray. And when I start with remote, I saw that the pink cable was burning. so I disconnected back again..