Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


'Fake' Brake Pads, EBC, Goldfren etc.

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 13:37 - 23 Feb 2012    Post subject: 'Fake' Brake Pads, EBC, Goldfren etc. Reply with quote

It's been said on the forum for a while that one has to be extra careful when ordering brake pads online as they can sometimes be 'fake'.

Has anyone had any experience with fake pads? Can you tell the difference? How would you tell if they are fake?

Just out of interest really, seeing as I have bought/ fitted for others or myself a fair few sets of pads over the last couple of years.

Cheers
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

pits
World Chat Champion



Joined: 22 Apr 2008
Karma :

PostPosted: 14:12 - 23 Feb 2012    Post subject: Reply with quote

No idea, never come across this, maybe they just mean they are shit? As I know full well I would never fit EBC parts to my car or bikes, infact if I bought any vehicle with EBC stuff even if brand new I would pop them in the bin and replace them with OEM pads.
____________________
Stinkwheel: You have no right to free speech
00:32:08 Blau Zedong: yes, i am a massive CB400 fan and collector
00:33:00 Blau Zedong: the CB400 is my favourite road bike
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 14:13 - 23 Feb 2012    Post subject: Reply with quote

pits wrote:
No idea, never come across this, maybe they just mean they are shit? As I know full well I would never fit EBC parts to my car or bikes, infact if I bought any vehicle with EBC stuff even if brand new I would pop them in the bin and replace them with OEM pads.


Whys that?
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

pits
World Chat Champion



Joined: 22 Apr 2008
Karma :

PostPosted: 14:39 - 23 Feb 2012    Post subject: Reply with quote

0l0dom0l0 wrote:
pits wrote:
No idea, never come across this, maybe they just mean they are shit? As I know full well I would never fit EBC parts to my car or bikes, infact if I bought any vehicle with EBC stuff even if brand new I would pop them in the bin and replace them with OEM pads.


Whys that?

I had a car with EBC red stuff and Turbo groove discs, the pads I set on fire and they crumbled when I took them out and replaced them, suffered epic brake fade as well, replaced with Carbotech XP8 pads and they were leagues ahead the discs fractured.

As in they cracked, here are the pictures, I had to draw over them on paint to high light the cracks/fractures
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0232.jpg
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0230.jpg
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0228.jpg
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0227.jpg
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0233.jpg
https://i34.photobucket.com/albums/d112/pitslayer/stuff/Photo0229.jpg


That was on a car, get fucked if I am putting EBC parts on my bike
____________________
Stinkwheel: You have no right to free speech
00:32:08 Blau Zedong: yes, i am a massive CB400 fan and collector
00:33:00 Blau Zedong: the CB400 is my favourite road bike
 Back to top
View user's profile Send private message You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 14:52 - 23 Feb 2012    Post subject: Reply with quote

Pits maybe your EBC parts were fake?

I've always used genuine EBC stuff on car and bike and I've never had an issue in over twelve years.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

stonesie
World Chat Champion



Joined: 04 Jul 2010
Karma :

PostPosted: 14:59 - 23 Feb 2012    Post subject: Reply with quote

Funny thing, I had the opposite experience with OEM pads in my old E30 dying worryingly quickly on the road (it did have a 2.8 conversion) and the rears were taking a massive beating, smoke from the rear brakes was common after some spirited driving.

For a looming track day at Cadwell Park I fitted a full set of Yellowstuff pads and ATE (OEM manufacturer) discs, powerdiscs up front with ATE Super-Blue fluid and they were faultless, no fade, no smoke and even gave good stopping power in last winter's sub zero temperatures.

The bikes had EBC HH pads fitted before I bought it and I am in no hurry to change them.


Last edited by stonesie on 15:02 - 23 Feb 2012; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kris
World Chat Champion



Joined: 03 Feb 2002
Karma :

PostPosted: 14:59 - 23 Feb 2012    Post subject: Reply with quote

I've always used standard EBC brake pads and never had a problem. In fact, teh one time EBC were out of stock and I went for a Brembo sintered instead - I warped a disc. Go figure.

<shrug>
____________________
NSR125RR - ZXR750H1 - ZX9R E1 - GSF600S - GSF600SK3 - VFR400-NC30 - SV1000N - ST1100-R - CBR900RR-R - GSF1200SK5 - GSF600SK1 - VFR1200FA - GSXR1000K2 - ZZR1400 D8F
www.prisonplanet.com
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 15:11 - 23 Feb 2012    Post subject: Reply with quote

Hi

Used EBC pads loads of times and had no issues (well, except on the Bimota where the pads I tried seemed totally incompatible with the disk material - being able to count slowly to 5 after pull the brake lever before anything happened in the wet wasn't something I enjoyed).

Never heard of fake brake pads (fake chains yes), but they wouldn't surprise me. There are some rubbish makes of pads. Had some I stuck in a car a few years ago as it was all I could get to fit at short notice. They wore out in about 4k max. Possible that with the current more stringent rules on pads it just makes it easier to package up these dodgy pads in fake packaging rather than have something traceable.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

pits
World Chat Champion



Joined: 22 Apr 2008
Karma :

PostPosted: 15:30 - 23 Feb 2012    Post subject: Reply with quote

Kris wrote:
I've always used standard EBC brake pads and never had a problem. In fact, teh one time EBC were out of stock and I went for a Brembo sintered instead - I warped a disc. Go figure.

<shrug>

Ah the old warped disc myth on a car, you mean you overused the Brembo pads and left brake pad deposits on the disc which then causes a vibration in the discs which makes it feel like the brake discs are warped.

And I can assure you, those were genuine articles, bought from Camskill, people who rate EBC pads have never tried good discs and Carbotech XP8 or Ferodo DS2500 or what ever they are called, makes the EBC pads look like the cheap shit they are, there was a big thread on PH about EBC pads, and the consensus was not to fit them, wasn't there a thread on here the other day about EBC clutches falling apart?

You can fit them to your cars or bikes, but having experienced how awful the red stuffs were and their discs I wouldn't go near with a barge pole

Example
https://pistonheads.com/gassing/topic.asp?h=0&f=135&t=822742&mid=0

Where as the Brembo pads I have used, never had a problem, the stock OEM pads, never had a problem
Ferodo pads no problems
Carbotech no problems
EBC's fell apart and their discs fractured, suffered horrific brake fade, I set Red Stuffs on fire, you shouldn't be able to set them on fire.

Back to the warped discs, mate of mine had EBC Turbo grooves and Yellowstuff pads, constant vibration, replaced pads, discs, vacuum hose, brake fluid etc, turned out that the problem he was having was the pads (EBC) were falling apart and leaving deposits on the discs, he sent the discs off and had the top layer skimmed, came back, put Ferodo pads on, no problems since.
____________________
Stinkwheel: You have no right to free speech
00:32:08 Blau Zedong: yes, i am a massive CB400 fan and collector
00:33:00 Blau Zedong: the CB400 is my favourite road bike
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 15:36 - 23 Feb 2012    Post subject: Reply with quote

Haven't come across any obviously fake branded stuff but I wouldn't be surprised if it happens.


Some of the cheap stuff is fine though, for my car I paid £40 for 2 front discs and 4 pads Laughing .


Been on there for about 10k Thumbs Up .
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kris
World Chat Champion



Joined: 03 Feb 2002
Karma :

PostPosted: 15:46 - 23 Feb 2012    Post subject: Reply with quote

pits wrote:


Ah the old warped disc myth on a car, you mean you overused the Brembo pads and left brake pad deposits on the disc which then causes a vibration in the discs which makes it feel like the brake discs are warped.


Nope, we measured the runout when we got back to the campsite by rigging up a fixed reference point and spinning the front. The pulsing from the front wasn't amazingly bad but seeing as we were in the Alps racing Brabus Smart cars over the mountains - it was enough to get concerned about.

I've used EBC standard pads even harder than that before and still never had a disc warp. I never even have to worry about 'overusing' a pad either - whatever that means.

Neutral
____________________
NSR125RR - ZXR750H1 - ZX9R E1 - GSF600S - GSF600SK3 - VFR400-NC30 - SV1000N - ST1100-R - CBR900RR-R - GSF1200SK5 - GSF600SK1 - VFR1200FA - GSXR1000K2 - ZZR1400 D8F
www.prisonplanet.com
 Back to top
View user's profile Send private message You must be logged in to rate posts

Sako
World Chat Champion



Joined: 19 Feb 2012
Karma :

PostPosted: 17:21 - 23 Feb 2012    Post subject: Reply with quote

+1 on the carbotech's, had them on my Evo 6 a while back (now sold Sad ) and they managed to stop it on a penny from some pretty high speeds without any issues - they were a bit noisy though
 Back to top
View user's profile Send private message You must be logged in to rate posts

Tenko
Could Be A Chat Bot



Joined: 09 Jul 2011
Karma :

PostPosted: 17:36 - 23 Feb 2012    Post subject: Reply with quote

I've never come across fake pads before - I use EBC HH and haven't had a problem so far.

Keith, you may have been unlucky - I had a set of EBC HH in my old SB6R and they were fine....
 Back to top
View user's profile Send private message You must be logged in to rate posts

69.9mph
Crazy Courier



Joined: 20 May 2006
Karma :

PostPosted: 18:20 - 23 Feb 2012    Post subject: Reply with quote

I only use EBC kevlar/organic on my everyday bike and OEM Brembo on the litre bike, never had any problems.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Babba This post is not being displayed because the poster is banned. Unhide this post / all posts.

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 10:17 - 24 Feb 2012    Post subject: Reply with quote

Tenko wrote:

Keith, you may have been unlucky - I had a set of EBC HH in my old SB6R and they were fine....


Did yours have cast iron disks? That seemed to be the issue.

Didn't help that as stock the Dieci uses Brembo calipers with a Yamaha master cylinder and the ratio between them is well out leaving the brakes very dead feeling.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Tenko
Could Be A Chat Bot



Joined: 09 Jul 2011
Karma :

PostPosted: 13:32 - 24 Feb 2012    Post subject: Reply with quote

I can't remember but I'm assuming they weren't because they didn't rust. It had the standard Brembo calipers if that is a guide.

You probably know the bike - I sold it to the bloke in Halifax who collects them (if I recall he had a red YB11 and a tuned/noisy white SB6 at the time) and is well known in the owner's club.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 13:52 - 24 Feb 2012    Post subject: Reply with quote

Tenko wrote:
I can't remember but I'm assuming they weren't because they didn't rust. It had the standard Brembo calipers if that is a guide.


Sounds like they weren't the cast iron disks. My suspicion is that the EBC HH pads are incompatible with cast iron disks.

Calipers on mine are the older early 4 pot Brembos. Similar to those used on the Ducati 907IE. With the stock m/c you needed a death grip on the lever to get them to work (they did work, just needed a hell of a lot of lever pressure).

I might know the bike, but not knowingly.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 270 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.06 Sec - Server Load: 0.32 - MySQL Queries: 16 - Page Size: 109.74 Kb