Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


What cheapish RC car for tarmac?

Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF... Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 00:17 - 16 Sep 2013    Post subject: What cheapish RC car for tarmac? Reply with quote

Any suggestions on what to look for, for a 'mess about' and possible project RC car for use on tarmac/concrete.

Secondhand is fine and preferred if it's better value.
Want everything if possible, so including controller, batteries charger - I do plan to get a powerlab 8 at some point, but that probably won't be for a bit (want it to basically replace the vast majority of my battery chargers).

So far, best I've found is to go brushless if possible as it's generally less hassle.
Wouldn't mind one with drift as well as normal stuff (seen some with both sets of wheels).

Ideally under £100, maybe a bit more.

Though, hopefully I'll have found some new folly by the time I actually decide to get one Smile.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 04:08 - 16 Sep 2013    Post subject: Reply with quote

Not exactly under £100, but I'm soon to be selling my 1/5 scale Baja 5B Flux with controller, batteries ( 2 x 4s batteries for maximum power), balance charger and power supply, lots of hop ups fitted (its got lots of metal parts compared to how it looks in the picture) as well as all original parts, 3 different sets of wheels & tyres (including tarmac tyres) and various other stuff.

It weighs 10kg and goes 60mph so it would be a very good purchase. Mr. Green


Last edited by Ste on 04:10 - 16 Sep 2013; edited 1 time in total
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 04:09 - 16 Sep 2013    Post subject: Reply with quote

The above post doesn't have nobcat so it's safe to unhide. Razz
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 09:12 - 16 Sep 2013    Post subject: Reply with quote

I'm really looking for a road specific one for my 'project' (only way I can justify it to myself - and hopefully will see sense anyway and spend it onuseful stuff, like food and bills!)
 Back to top
View user's profile Send private message You must be logged in to rate posts

MarJay
But it's British!



Joined: 15 Sep 2003
Karma :

PostPosted: 13:44 - 16 Sep 2013    Post subject: Reply with quote

I'd recommend an Associated SC10 with new tyres. It's an off road truck but it's 2wd and the suspension can be firmed up so it's pretty good on road. There is also an RtR version and includes brushless motor and all the gubbins. it's a bit more money than your budget though, last time I checked it was about £180.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F; Cheap project: CBR900RR FireBlade
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 15:02 - 16 Sep 2013    Post subject: Reply with quote

I really want a 'proper' road chassis for my 'project', however on consideration, could probably manage with a dirt one (and for general fun would probably prefer a dirt one).
Can you get stiffer suspension/springs for tarmac use to work with dirt orientated machines?
 Back to top
View user's profile Send private message You must be logged in to rate posts

garth
World Chat Champion



Joined: 15 Dec 2004
Karma :

PostPosted: 15:28 - 16 Sep 2013    Post subject: Reply with quote

G I might have a 2ch radio and shit if you want it - I also have a Tamiya mini thing - I think, somewhere. No body tho.

This is from ages ago, no time to faff about with that now.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 19:05 - 16 Sep 2013    Post subject: Reply with quote

Not worried by body particularly - happy to stick a bit of the bucket I broke the other day to keep parts from being damaged.

What do you want for your stuff?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wonko The Sane
World Chat Champion



Joined: 20 Jan 2013
Karma :

PostPosted: 22:23 - 16 Sep 2013    Post subject: Reply with quote

have a gander on oople.com in the classifieds.

stick to well known manufacturers such as tamiya, kyosho, team lossi, associated etc.

if you're wanting something cheap and cheerful, mardave.
____________________
Looking to pass your CBT / Bike tests in Bury Lancashire? try www.focusridertraining.co.uk Would recommend.
They're also on Facebook https://www.facebook.com/pages/Focus-Rider-Training/196832923734251
 Back to top
View user's profile Send private message You must be logged in to rate posts

prawny1
World Chat Champion



Joined: 28 Jun 2005
Karma :

PostPosted: 22:53 - 16 Sep 2013    Post subject: Reply with quote

If you want a project why not make your own chassis and use a strimmer or minimoto engine bolted to a cheap cvt.Should be more reliable than a basic buggy/ car and you wont have to mess around with glow plugs or special fuels.

my nephew bashed one of those 50cc buggies round for months, whereas his Subaru 3 speed nitro car was forever breaking.

All the servos wheels and tyres can be picked up cheap, especially if you buy a broken car as a donor.
____________________
hellkat wrote:

Some people are only alive cos its against the law to kill them.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 23:05 - 16 Sep 2013    Post subject: Reply with quote

prawny1 wrote:
why not make your own chassis and use a strimmer or minimoto engine

Slow.

Half decent Lipo batteries + brushless motor = fast and you can use it more places without people complaining as it doesn't make much noise.

However I have got for eBay four spares or repair cars which will be going on with a £5 or £10 starting price; an HPI Savage Flux XL, Blitz Flux, Apache SC Flux and Trophy Buggy Flux. But they're all quite fucked with various pieces missing or broken, the Savage Flux XL is in the best condition but it isn't for tarmac/concrete. Sad The Trophy Buggy Flux is less fucked than the Blitz and the Apache SC but I don't think it's whats G is after.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Rigga
World Chat Champion



Joined: 29 Nov 2012
Karma :

PostPosted: 23:19 - 16 Sep 2013    Post subject: Reply with quote

I know it's not what the op is after but I've got a hpi savage flux hp. They are fucking stupendously fast, and I only run it on 4 cell lipos. God knows what it would be like on 6s! I've also got a few vintage tamiyas which are just shelfers, not for bashing.

That savage, what a hoot!
____________________
Current bike: Honda CBR 1100xx
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 02:07 - 17 Sep 2013    Post subject: Reply with quote

6s = standing back flips Mr. Green
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Wonko The Sane
World Chat Champion



Joined: 20 Jan 2013
Karma :

PostPosted: 07:25 - 17 Sep 2013    Post subject: Reply with quote

didn't spot the drift bit.

Tamia TL01 was the drift car of choice, however it's been replaced by a newer model.

For drift you're wanting shaft drive four wheel drive

it can be done using a decent motor and battery pack, although brushless will give more power.

you can upgrade to brushless at a later date, you need to upgrade the speed controler to brushless at the same time as you do the motor
____________________
Looking to pass your CBT / Bike tests in Bury Lancashire? try www.focusridertraining.co.uk Would recommend.
They're also on Facebook https://www.facebook.com/pages/Focus-Rider-Training/196832923734251
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rigga
World Chat Champion



Joined: 29 Nov 2012
Karma :

PostPosted: 07:53 - 17 Sep 2013    Post subject: Reply with quote

Ste wrote:
6s = standing back flips Mr. Green


It does that on 4s!
____________________
Current bike: Honda CBR 1100xx
 Back to top
View user's profile Send private message You must be logged in to rate posts

garth
World Chat Champion



Joined: 15 Dec 2004
Karma :

PostPosted: 08:00 - 17 Sep 2013    Post subject: Reply with quote

G wrote:
Not worried by body particularly - happy to stick a bit of the bucket I broke the other day to keep parts from being damaged.

What do you want for your stuff?


I'll dig all the stuff out when I get five and see what's what. Not going to want a great deal for it but it should have some vaguely useful bits such as an ESC, etc. The chassis however is FWD, so not sure how much use it would be. I think I've also got a petrol RWD buggy somewhere.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 21:58 - 17 Sep 2013    Post subject: Re: What cheapish RC car for tarmac? Reply with quote

Not looking for nitro anyway prawny - electric is even less hassle and these days offers plenty of power/range.

Not stuck on the drift - but liked the 'full size' drifting, so makes sense to play a little with mini ones.

From what I could see brushless means less hassle (as well as more power), but it was the less hassle that I was more interested in.

I reckon I might be able to make a dirt one work in my plans, especially if I could fit much stiffer springs.

Ideally wanted a full set, but if the 'price is right', might be interested in whatever - including FWD chassis etc. Possibly even petrol buggy, but think it'd have to be a very 'right' price Smile.

Feel free to drop me some prices and I'll compare to what else is out there etc Smile.

Ta for the thoughts so far Thumbs Up.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wonko The Sane
World Chat Champion



Joined: 20 Jan 2013
Karma :

PostPosted: 22:40 - 17 Sep 2013    Post subject: Reply with quote

never actually owned a brushless myself.

even when racing, the most I ever did to a motor was spray some compressed air in to try and blast any muck out of the motor, spot of lube here and there in gear boxes and ensure batteries were stored drained etc.

you're not racing, just mucking about so no need for highly strung race motors

thought brushless motors needed tlc?


https://www.anticsonline.co.uk/2412_1_1605460.html that's the current Tamiya drift chassis TT-02
____________________
Looking to pass your CBT / Bike tests in Bury Lancashire? try www.focusridertraining.co.uk Would recommend.
They're also on Facebook https://www.facebook.com/pages/Focus-Rider-Training/196832923734251
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 23:30 - 17 Sep 2013    Post subject: Reply with quote

From what I've read brushless should need less, as you don't have the brushes wearing down, leaving deposits on the engine - then reading about bits needing lathing etc.

However; sounds good if it's not so worry some for general messing about Thumbs Up.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Yoyo This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

Wonko The Sane
World Chat Champion



Joined: 20 Jan 2013
Karma :

PostPosted: 20:35 - 22 Sep 2013    Post subject: Reply with quote

G wrote:
From what I've read brushless should need less, as you don't have the brushes wearing down, leaving deposits on the engine - then reading about bits needing lathing etc.

However; sounds good if it's not so worry some for general messing about Thumbs Up.


The classes I raced in didn't allow top end motors, only what came in the box or a 'sport' motor, a slightly performance version of the kit motor.

Never wore one out, did burn one out once when the speed controller stuck at full pace with the car against a wall and the wheels managing to grip.

for mucking about, a standard set up would do, spot of compressed air to clean things out and a drop of contact cleaner and should be good to go

I'd be surprised if he wore a motor out.
____________________
Looking to pass your CBT / Bike tests in Bury Lancashire? try www.focusridertraining.co.uk Would recommend.
They're also on Facebook https://www.facebook.com/pages/Focus-Rider-Training/196832923734251
 Back to top
View user's profile Send private message You must be logged in to rate posts

groovylee
World Chat Champion



Joined: 20 Nov 2011
Karma :

PostPosted: 20:47 - 22 Sep 2013    Post subject: Reply with quote

Black Sheep wrote:
didn't spot the drift bit.

Tamia TL01 was the drift car of choice, however it's been replaced by a newer model.

For drift you're wanting shaft drive four wheel drive

it can be done using a decent motor and battery pack, although brushless will give more power.

you can upgrade to brushless at a later date, you need to upgrade the speed controler to brushless at the same time as you do the motor


I've got a Tamiya TL01 set up in the loft somewhere. let me dig it out tomorrow and i'll see what ive got exactly. I believe it's got a ford focus wrc shell on it currently.

i'm too busy with my grasshopper to bother with it atm. Cool

Lee
____________________
Past - 1988 honda revere 600, 1996 kawasaki gpz500s, 1999 Yamaha R6

Current - 2002 Aprilia RSV1000R & 1999 Kawasaki ZX6R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 20:53 - 22 Sep 2013    Post subject: Reply with quote

That'd make sense - that the issues are more with people really pushing them.

However, it's possible that my budget might have increased a bit.
Hopefully will know next week.

Been spending too much time looking at it this weekend (had man-flu, that's my excuse).

Tempted to go for a buggy as it seems it's not too far of a push to use it for road stuff and, thinking about it, reckon it can fit my plans fairly well.

Also gives more options for off-road fun.

Liking the look of a second hand Vorza if I can get one for a not too silly price, though may stick a bid on a HPI trophy that isn't far from where I am now, if it doesn't go up too much.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :

PostPosted: 21:10 - 22 Sep 2013    Post subject: Reply with quote

Vorza is good, Baja is better.

It's much better than spending money on boring things like rent or food or bills. Razz

I first had a Trophy Truggy, stock its a bit boring and once you start making upgrades its cheaper to have bought something better to start with. Mr. Green
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 21:35 - 22 Sep 2013    Post subject: Reply with quote

I didn't click you'd mentioned (and pictured) that Vorza.

Would you say a mostly stock 6s Vorza is a lot better than a fairly stock Trophy (4s, with metal towers and different suspension)?

The big thing for the Vorza (as well as being a bit faster), was that they seem to be pretty sturdy, though apparently a bit heavy for it.

There was a clip where The Gadget Show set some jump record with one. The impressive bit was not setting the jump record, but before that where it smashed in to a brick pillar at some speed in mid air and just needed the shell putting back on or something.

[edit]I'd be looking at a good bit less than you sold your Vorza for if I was to get one.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 59 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.08 Sec - Server Load: 0.6 - MySQL Queries: 16 - Page Size: 137.07 Kb