Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Honda CG125 W 1999 project help?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

PT1989
Borekit Bruiser



Joined: 17 Apr 2014
Karma :

PostPosted: 23:02 - 17 Apr 2014    Post subject: Honda CG125 W 1999 project help? Reply with quote

Hi all, first post, first project

Picked up a Honda cg for next to nothing, due to their reputation & it fits my purposes perfectly (cheap, mostly) & decided to turn it into a bit of a project because for the price, it can't go too wrong.

Have a few questions

I want to make the exhaust a little louder, not obnoxiously loud, I don't expect it to sound like a Harley, just want slightly more presence on the road, for safety, my commute is mostly very small twisty country lanes, so would help if people hear me before they come flying round the corner at me. With an engine as basic as this would it be as simple as cutting the pipe and bolting on a universal megaphone exhaust?

Also, I'd prefer to put chunkier wheels on it, again due to the dirt track roads it spends most of its time on, I've found an on/off road tyre that fits the rear 3.00x18, but can't find anything for the front 2.75x18, will a 3.00x18 tyre fit on the front wheel or is that pushing it? If not, what are my options with replacing the wheel? The forks could probably do with replacing at some point anyway, so if easy enough I wouldn't mind putting forks from another bike on there. For example, will the forks from an Honda xr fit straight in, as I know they're fairly similar? Any other suggestions would be great. The other benefit of replacing the forks would be so I can have a disc brake on there, as the drum brake is horrific in comparison to other bikes I've used.

And lastly, I've replaced the headlight unit with a full led unit, but I'm still not overly thrilled, and I work nights (again on the country lanes, hitting a badger on a bike does not end well for either party, trust me!) so I'm thinking of adding a couple of spotlights on there too, I've replaced the battery with a brand new motobatt battery (always had great results from them) but have heard the electrics are well known to be awful on a Cg, so will it have enough power for all of these lights to be on full? Or are they all going to be dim?
If so, what are my options? Could I fit a bigger more modern battery? (like the motobatt for a more modern bike) and wire this up directly, or would this involve replacing all of the electrics?

New to all this, so hope someone can help out, any ideas welcome, it's half about practicality & half about playing about with it.
Have done a little bit, but mostly just visual stuff, aircraft paint job by hand, red handlebars, new battery, handguards, exhaust painted matt black, stone guard, led headlight unit, new PAIR of mirrors, as every bike I've bought seems to come with either one, or no mirrors!
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :

PostPosted: 11:28 - 18 Apr 2014    Post subject: Re: Honda CG125 W 1999 project help? Reply with quote

1) Sound is directional and an exhaust points backwards. At 50mph oncoming traffic will not hear you until they have passed. I would not bother.

2) Dirt bikes often have very narrow wheels, you dont need wider wheels. Spend the money on getting some good tires. However, I would certainly do the swap to avoid drum brakes.


3) LED's are a new technology and you wont find any cheap solution that provides adequate lighting for night use. Find a cheap HID replacement.
 Back to top
View user's profile Send private message You must be logged in to rate posts

PT1989
Borekit Bruiser



Joined: 17 Apr 2014
Karma :

PostPosted: 13:50 - 18 Apr 2014    Post subject: Reply with quote

Thanks for your reply

Yes, I understand what you mean about the exhaust, and I've seen that same argument before, but I mean, you can hear a noisy bike coming, I've heard bikes coming down the road, obviously they're louder after passing, but you can still heat them as they approach?



With the tyres the trouble I'm having is that I'm hitting mud patches that are wet all year round, and if I have to turn on these then it slides sideways and just wheel spins if I try and accelerate off it, one of these muddy patches is also the work "car park" so setting off can be an absolute nightmare, so really I'm looking for something that'd dig in, and I can't find any Road tyres that would be any better, so want to give knobbly tyres a go

As for the leds, I got them due to the cg's notoriously poor electrical power, and leds are much more efficient, they're better than the stock headlight, but not massively so, so I'm wondering of rather than replace the brand new unit like you suggest, if I keep that, and add a couple of spotlights on the handlebars (not led) , does anyone know if they cg will be able to power both?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Teflon-Mike
tl;dr



Joined: 01 Jun 2010
Karma :

PostPosted: 15:05 - 18 Apr 2014    Post subject: Reply with quote

OK... I have taken road bikes with nie on 'slick' sports tyres'off-road'.

CG? Built for third world markets, you must have seen the photo's of them, three up with cages of chickens on the rack tootling through the Meekong delta down mud-tracks.

Your 'problem' isn't tyres.

Thirty years of trials and 'off-road'... better tyres are good, when you are REALLY 'off-road' BUT, give a newby better tyres, they just get further into trouble before they get stuck. On crap tarmac seasoned with cow-shit? It ent 'off-road' you dont need 'off-road' tyres. They wont help much to find traction on those odd patches of slurry, more likely to loose you traction and cause bike to be even more mis-behaved on the stuff you can find grip.

First fit 'better rider'.
Learn to not hit patches of slimy shit on the road.
Learn not to try turning on them.
Learn to go slower, so if you do have to go over them, you go through on momentum, preferably upright so there's no sideways force to make you slide.

Its called learning to ride.

As for the exhaust? Yeah. Oh-Kay.. you want it noisy for 'safety', so other traffic knows you are there?!

Sorry, but Bollox. You have a little button on your handlebars... ought to have been told how to use it on your CBT, it makes a horn go 'Beep' reasonably loudly, and instruction is to use it to warn other traffic of your presence!

Not enough? Fit a louder one. Use tool for the job.

Riding country roads where cars might not see you? Hmmm... whats the instructions in the highway code? Ride at a speed in which you can safely stop in the distance you can see to be clear. This may NOT be as fast as the speed limit. Requires the use of judgement... and if a car comes pelting round a corner... well, chances are that in sound-proof box with stereo turned up, they aren't going to hear a cow-fart motorbike exhaust no matter how loud, and even if they did, not associate it with anything on the road, and slow down, or pay more attention to you anyway,

Back to the top... learn to ride, ride apropriately to teh conditions, your machine and your ability.

Your bike out to be perfectly adequate for the job as it is....

NOW... if you want to tell us you just dont like the sound it makes, and the way it looks, and what you really wanted was a KTM but your making do, and want to do a bit of 'customisation'... fess up tell truth stop making excuses, and we might be able to better help...

Tell you much the same thing... learn to ride what you got, forget fucking about with the CG trying to make it something its not; get licence, get a bike that is what you want! But still.

DONT chop bits off the exhaust. It wont sound 'meatier' and drivers wont take any more notice of you, they'll just be half offended half amused, sounding like a cow with terminal flatulence, and think you even dafter than they do just for riding a bike in the first place.

Fit better tyres if you must; but I wouldn't be muggering about trying to get clever with block-treads or knoblies; pair of Michelin M45's, job done.

I was pigging about on missus 125 with them tyres on in the snow! and have utter confidence in them every where from nice new by-pass tar, to cut up, pot-holed gravel strewn country lanes, to crossing muddy fields and camping sites.
____________________
My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?'
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
unitynotsocri... This post is not being displayed because the poster is banned. Unhide this post / all posts.

Teflon-Mike
tl;dr



Joined: 01 Jun 2010
Karma :

PostPosted: 20:57 - 18 Apr 2014    Post subject: Reply with quote

Having seen your thread in Show & Tell...
https://www.bikechatforums.com/download.php?id=92428
You want better lighting? Start by taking the grill from in front of the ruddy lens!

I will admit, that I think the WWII mustang paint is mildly amusing; but the high-level mudguard, grip-guards and other adornments DO sort of confirm my initial suspicion that you dont REALLY want to mod the thing primarily for 'safety'... do you?
____________________
My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?'
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

PT1989
Borekit Bruiser



Joined: 17 Apr 2014
Karma :

PostPosted: 22:43 - 18 Apr 2014    Post subject: Reply with quote

Very presumptuous there aren't you.

They aren't tarmac roads with a few patches on them, they're dirt roads, no tarmac, and on some parts the water run off from the fields turns whole sections of it to mud, some of these bits are corners, so yes, I have to turn on them. And obviously I'm not racing down these roads, I'm taking it slow and keeping the bike upright, you've made another assumption that I'm a new rider too and that I need to "learn to ride" I can ride it, I have been, and will continue to do so, I'm just looking at options to make it easier, and asking people advice on doing so, not a holier than thou lecture from some know it all smart arse.

Are you actually suggesting that if I hear a car coming then I drive around the corner blaring the horn? How is that an ideal situation?

I have no problem with how the exhaust sounds, I personally prefer the quieter exhausts, nor do I have any desire to own (or try and replicate) a ktm, I've said why I want it, I'm not trying to make excuses.

And for the record, I have my full licence, I've got a pan European for my real riding, this is just a cheap second bike for the crappy dirt roads to work, it cost me less to buy it than it cost to fill the tank on the pan, so I don't mind using it as a first attempt project. These are basically the only roads this bike is ever going to see, so why bother having Road tyres on it?

Also, the grill is just a personal preference, not to everyone's taste, obviously I tried without it, and it makes no difference to the lighting so kept it on there.
The guards I put on all my bikes as I feel they make a huge difference with the wind chill when riding in cold weather, no other reason. And that mud guard was already on the bike, it's being replaced as soon as an original comes up cheap enough.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Teflon-Mike
tl;dr



Joined: 01 Jun 2010
Karma :

PostPosted: 00:22 - 19 Apr 2014    Post subject: Reply with quote

PT1989 wrote:
Very presumptuous there aren't you.

Yes. But only working with what you offered.
PT1989 wrote:
They aren't tarmac roads with a few patches on them, they're dirt roads, no tarmac, and on some parts the water run off from the fields turns whole sections of it to mud, some of these bits are corners, so yes, I have to turn on them.

OK.. sounds like typical third workd thoroughfare... sort of track the CG was designed to be ridden on.
However; if they aren't 'roads' then they have no public right of way attached... you shouldn't be riding down them.
If they are legal rights of way, with vehicular access... they ARE 'roads'.
If the surface is as bad as described; then they ought to be classified as an unsurfaced right of way, and carry an 'unsuitable for motors' warning... ie be a 'green-lane'
Yup. There are folk who believe that they need a full Charlie & Ewan machine, or some sort of moto-cross refugee to tackle such trails, but as said, most are better surfaced than the third world tracks the CG was designed to contend with on a daily basis; and few genuine, legally rideable UK green-lanes are much more challenging than a farmers track...
So, not being condescending, BUT, if the road is truly that terrible; either its not a road, or you don't need new tyres, you need to report it to the council, to either get it fixed or get it re-classified!
OR... back to top... its not that terrible... you just need to learn to ride those conditions better.

PT1989 wrote:
Are you actually suggesting that if I hear a car coming then I drive around the corner blaring the horn? How is that an ideal situation?

Daftly enough, YES! That is ACTUALLY what the horn is for!
Alerting other road users to your presence!
Single track road, blind bends, hump-back bridges; pap the horn, let any-one the other side know you are entering the 'hazard'.

How is that NOT ideal? You want to cut of your silencer so you have a bike that sounds like a brick in a cement mixer ALL the time, JUST so that what? No one takes any bludy notice your just that anti-social bludy motor bike A-Gain!

PT1989 wrote:
I have no problem with how the exhaust sounds, I personally prefer the quieter exhausts,

So leave it alone then!

PT1989 wrote:
And for the record, I have my full licence, I've got a pan European for my real riding,

So you dont 'really' ride the CG?

PT1989 wrote:
this is just a cheap second bike for the crappy dirt roads to work, it cost me less to buy it than it cost to fill the tank on the pan, so I don't mind using it as a first attempt project.

Reasonable sentiment; I ride tiddlers for similar reasons.

PT1989 wrote:
These are basically the only roads this bike is ever going to see, so why bother having Road tyres on it?

Because its a road bike, and you are using it on the road...

PT1989 wrote:
Also, the grill is just a personal preference, not to everyone's taste, obviously I tried without it, and it makes no difference to the lighting so kept it on there.

Well if lights so dire it makes no difference, you do have problems.
CG generator is not really up to powering more than stock 35W bulb, and I believe that on drum brake models, its unregulated AC direct lighting, straight off the magneto, which rather hinders upgrades.
Try the stocker; LED's dont tend to have the same intensity hence range as a tungsten, even though they may have better brightness.
If you want the best lights that geny can power, you would need to convert to fully regulated DC lighting and use 35W HID with reflector lens. Its doable, but it ent cheap.

PT1989 wrote:
The guards I put on all my bikes as I feel they make a huge difference with the wind chill when riding in cold weather, no other reason.

They do, I would agree; missus has them on her 125.
But back to the presumptions... hand guards and a paint job.... The first mods you make? Hence reasonable to presume the bikes looks are more important to you than than brakes, tyres and lights... no?
____________________
My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?'
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 01:10 - 19 Apr 2014    Post subject: Reply with quote

The Kenda "K270" tyre comes in 2.75-18 flavour, altho most seller I've found are in USA, maybe ring around and see if any dealers can order in for you?

Cheng Shin C186 and C7202 also fit the bill and come in 2.75-18 according to their website. Might have to ring around for a dealer though.

As for lighting, swap out all the ancilliary bulbs (brake, tail, indies) for LEDs and use up the freed up wattage to run a hefty headlight. Of course to run a meaty headlight, the headlight surround needs to be able to take the heat, and the condition of the wiring needs to be good to keep the voltage at the headlight bulb terminals high.

I don't know how far you want to be going with it, but maybe look into installing headlight relays to get the highest possible voltage at the headlight, on a bike with a pretty marginal electrical system at the best of times, getting those resistances and voltage drops as low as possible is probably your best bet to get decent brightness.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

PT1989
Borekit Bruiser



Joined: 17 Apr 2014
Karma :

PostPosted: 02:02 - 19 Apr 2014    Post subject: Reply with quote

One of the roads is a green Lane, but most of them just are what they are, and carry no signage, so perhaps there is tarmac a few inches down, I haven't tried digging them haha. It is mostly farms up there, and unfortunately a mental health care home stuck out in the middle of it, where I work, the council have been made aware on multiple occasions, as we've had to ask farmers to help with tractors when visitors have come here and got stuck at one particularly bad section. The tyres are going to need to be replaced fairly soon anyway so I'm just wondering if I might just give it a go with the knobbly tyres to see if I get any improvement.

I was never going to just cut off the silencer, I was going to replace it with a smaller one, not super loud & anti social, just enough so that as a car comes around a corner there's more chance of them hearing me and being aware I was there. I see your point about the horn though, and I'll see how that goes when the postman eventually turns up with my new horn anyway, as with the existing one I'd be better of whispering excuse me!

What I mean is the cg is exclusively for this commute on these roads only, it's about 7 miles, narrow, twisty, muddy lanes, where you rarely go over about 30mph.

Yeah I see your point about the mods, but it's not been done in order of priority, but availability, I haven't decided what to do with the front end yet, so can't put the disc brake on until I have, which is why I came on here, same with the lights, although the idea of replacing all other lights with leds to free up some power seems so obvious now it's been said, so I'll be doing that. Whereas the paint was already in the shed, as were the guards, and I had a spare afternoon with good weather. Handlebars had to be replaced anyway, as they were rusted and very slightly bent, but enough to annoy me.

I can see your point, and why you'd assume, but hopefully now you have more of an idea of what I'm doing. A mate had the bike sitting in his garden, the wife wanted it gone, and he got offered 35 scrap value, I offered him 40, changed the oil, plug & fuel, and it started 2nd kick, passed it's mot that afternoon with only an advisory for pitting on the forks, but they're going anyway, so I think I got a good deal, and I've wanted to have a go at a project for years anyway, but never dared, this can't depreciate in value whatever I do at that price though
 Back to top
View user's profile Send private message You must be logged in to rate posts

Teflon-Mike
tl;dr



Joined: 01 Jun 2010
Karma :

PostPosted: 13:22 - 19 Apr 2014    Post subject: Reply with quote

Laughing
I was a project manager; but my 'projects' were always the shit no-one else could deal with; I was a trouble shooter, trying to find out not what the problem was, but what the problem REALLY was..
Racing; mates with race bikes. "I have a problem with the suspension, I think the rising rate is rising too much"... "No, the 'problem is, you came in third...... from last..... again" Blank look "Well, Yeah! Because the rising rate is rising too much!"... "No... you THINK that's because of the suspension".."Yeah, I think its the suspension 'cos it patters and wont let me put the power down"....and you go through the loop a dozen times, trying to find why he THINKS the suspensions not right. Bottom line; whatever may or may not be 'wrong' with the bike... it ent done the job... win the race. Seems so obvious and stupid as to be irrelevant; so rider goes off chasing everything that they THINK is the cause and solve problems they THINK exist, not the real, stupid glaring you in the face obvious one!

So lesson; before fucking around modding bikes; be damn sure the mods are going to solve the REAL problem.. or you risk making more problems than you solve.

Exhaust; your 'problem', not that you want to be heard; you just don't want cars coming round corners and crashing into you!

Implied solution, a loud silencer; because you didn't like the idea of using the horn, and risking annoying a car driver thinking you were papping to 'tell them off' not 'tell them I'm here'...... so loud pipe to annoy every-one... all the time!

Consequential problems; getting a ticket for antisocial behaviour; non complience with C&U, failing MOT's and possibly screwing your carburation, making bike hard to start, possibly run weak, hot and do itself damage, and lots of causes for headaches.

Horn, used as intended? Well, you might piss off the odd townie car driver, who's used to horns being used as audible expressions of angst, rather than as highway code suggests.... but fuck-em... if they don't know the highway code, that's THEIR problem, not yours!

Most bike horns tend to be a bit weedy, I will admit; seems to be something of a following for Nortilus horns on here, though I've never tried them personally; fitted a pair of Range-Rover 'two-tones' pillaged from scrap Rangie, strangely enough, to the down-tube of missus's 125....

Quite amusing that.... Mallory Park... in trouble at the mment as new housing estate has attracted a load of Leicester and Birmingham NIMBYS into the country, who now grumble about the noise from the track, and of lack of lights and pavements on country roads Rolling Eyes

So picture the scene; approaching local Hump-Back-Bridge; short 'pap' as convention suggests I should, before entering the hazard... I potter over at little more than walking pace, to find car on the other side, looking perplexed... As I ride away, and glance in my mirrors.... they are still there.... head craning looking desperately to see where the Big 4x4 they expect to be coming over the bridge is! Laughing

So new horns might be pretty useful and actually do better job of solving that one. If not, some pillaged car horns could work quite well, and fall back if bike struggles to power them? Canister powered air-horn... sort of thing they take to football matches, worked off a relay.

Lights: You have a slightly more convoluted problem than merely the power output of the generator, as said, that age CG, I believe has unregulated AC direct lighting.

Rather than the generator charging the battery, then the battery powering the lights; the head-lamp and stop lamp, the tow big watt bulbs on the bike, are powered straight off the generator, and get AC current.

This could give clue to why your LED headlamp is not as great as it should be; LED's are Light Emmitting Diodes. Diodes are electric one-way-valves, so they might only be lighting when the two-way current from the generator is going the right direction, and turning off when its going the other way. They could also be acting as a regulator, and with the reverse current having no where to go, they could end up burning out.

I think that there is a down and dirty way to get fully rectified DC lighting on an earlier CG; the lighting circuit has a 'bridge' so that when the lamps are 'off' AC from that winding in the generator is diverted to the regulator to help charge the battery; so clipping the feed wire to the light switch, will in effect direct all lighting electric to the regulator to charge the battery, then you can tap the feed wire to the light switch into an ignition switched live, to get it from the battery.

This means that the headlamp wont go bright with engine revs and dim at tick-over, as AC Direct has tendancy to; but also means that if the genny isn't bunging out the amps, battery will get hard drained.

LEDing the other equipmentt? Good plan. We did this on O/H's 125 as well. Start with the idiot lights! Daft but you have three or four warning lamps for neutral, oil pressure, indicator tell-tale and hi-beam warning. As well as one or two instrument back-lights. These will tend to be around 5W each.

O/H's 125, has two dials with two back lights; sat in neutral with the indicator on, there would be as many watts coming out the dash panel as out the headlamp!

LEDing those will free up a lot of amps for other stuff. BUT, you will probably need to make a diode bridge for the indicator tell-tale, as LED's remember are one-way valves, and that tell-tale works off both indicator circuits, relying on a tungsten bulb lighting up with current in both directions.

LED Indies. Indies will probably have 21w bulbs in them. One side flashing is 42W again, more light than the headlamp. But, you need to do the job carefully.

CG will have an electro-mech flasher unit. It works like a relay; an electro magnet turning the circuit on and off to make lights flash. Frequency it turns on and off is set by 'lag' in the reaction speed of the electro-magnet and the return spring on the contact, so is 'dependent' on the current draw through the relay. If an indy bulb blows, flasher will tend to flash fast, because of reduced resistance on the circuit.

LED's save power from having a really low current draw; so if you fit them to an electro-mech flasher unit, timed for 21W tungsten bulbs, they will flash like fury.

Consequently, many after-market LED's simply put a ruddy great resistor in line with them... so they draw the same 21W as a tungsten bulb! So defeats your reason for fitting them.

You would have to get the right LEDs for the indicators, unbalasted, and then get a flasher unit timed for LED's. Agaian, many flasher units offered for LEDindies are merely electro-mechanical relays, timed for lower load. Put a tungsten on one and the flash rate reduces, maybe to nothing. And the electro-mech flasher will itself still be drawing a fair amount of current.

Best solution, as we used, was a 'solid state' chrystal timed flasher unit; works like a quartz watch and gives fixed flash rate regardless of current draw; but they can be more expensive, and you need to be sure to get one rated high enough to take load from tungsten bulbs if you ever envisage fitting a 'normal' bulb should an LED blow.

Tail Lamp: Remember, the stop-lamp is on the AC direct circuit, so check wiring and make sure that stop lamp circuit is fed from Regulated DC before going LED, or AC current will only light it half the time, and unregulated volts could blow it.

Tail lamp on the CG, I think is also a combined unit; the number-plate illumination provided by a window in the tail-lamp lens, and that ought to show 'white' light.

If you use a red LED cluster in the tail lamp; you will loose the nuber-plate illumination; so may need to add other lights, robbing you of saving.

Onto main issue HEADLAMP... tried lots of different set-ups on missus's 125.

Start was the OE headlamp; which in her case was 12v 35W tungsten, off regulated DC. It was ho-hum poor.

Next, we tried an after market 'halogen conversion'. Took a non standard 45W halogen bulb. It was brighter... but the beam pattern was horrible and overall, it was barely any more effective than stock set up.

I took the original Stanley lens and did a bit of tin snipping to make a standard H4 car headlamp bulb fit in it. 55W/50 it was FAR better, both brighter and better directed.

Seems that good OEM lenses are the key here; they are far more efficient than after-market replacements. Trouble is both lense and reflectors tend to go dull with age.

Next iteration was to fit the OEM headlamp from a GS500, designed to take a 50/55w H4, and with much bigger lens to throw the light out! WOW that was pretty impressive over my hybrid.

Last re-iteration, was to fit an HID bulb into that headlamp. That dropped teh power draw back to the 35W of the original lamp; but GEEZ its like a flood-light through large and good quality lens!

Year or so back, we went to the Vic Bikers Pub in coalville with Smiler. I took the car; Smiler followed me on his CG... and I can sympathise... it was a bit like a glow-worm in a jam-jar that lamp... Snowie on her bike following Smiler..... Snowie's HID was lighting the road up ahead of my CAR lamps from the back! THAT is how good they are.

But I really wouldn't stick a grill in front of the lens. I have never yet, smashed a head-lamp from stone or branch strike; yet grills do really scatter the light from the lamp.

Only lamps I have ever actually killed, were actually on Land-Rovers; Generic Lucas 7" 'Halogen Conversions' from Hella, as sold for Mini's and MGB's et all... only they have a hole for a side-light, not used on Landies.... and when not used, not very well sealed... so when wading into a river.... the fuckers have filled with water! Muddy water! And aparently.... putting them through the dishwasher DOES NOT WORK! Wink

TYRES What you got looks like Metzlers, and the tread pattern, rather more road biased. I have no idea how useful that rubber is, but for an 'all-round' tyre doesn't look the most helpful.

The M45's we fitted to Snowies bike, are very good. They are a road pattern, and they are fairly sticky, but they aren't quite as stickly or 'slick' as the Mitch 'sporties'. As said, I was playing on her bike in the snow; and have few qualms taking it down the gravel tracks that pass for counrty lanes round here, or even through muddy field. But probably not on a daily basis.

Now... CG takes about the skinniest rubber with a motorvehicle speed rating. 2.75x18 front, 3.00x18 rear. You ought to be able to get a 3.00 section on the front rim, but, I dont like over-tyring bikes, and a 3.00 on the front would make the steering heavier'. Narrower the section, more 'bite' it has through surface water and crap to get to what hard there may be beneath.

'Traction' being able to actually get it to shove you forwards? Well, like earlier comment, more you rely on a better tyre for traction, further you will get into trouble before you get stuck.

Ride for momentum, keep it smooth and moving, minimise forces, you can maximise the grip you got from any tyre, that is THE skill to off-road riding, and skill worth developing.

If the roads are truly as awful as you suggest... I THINK, and its a suggestion only... rather than looking at 'proper' trail or off-road tyres.... hybrid block-treads or knoblies.... I would be looking at some 'cheap' e-bay specials; old fasioned small block and rib 'economy' tyres. Sort of rubber them 3rd world paddy-field taxis tend to wear.

Hard and generally ungrippy on good tarmac, but if they rarely find hard to grip, does it really matter than much? Still skinny enough to cut-thru, and rugged 'enough' to cope with 'crap' roads and mud, and maybe going 3.00 front, 3.25 rear, if I had to up-size to get a more 'blocked' front pattern.

BUT, if changing front end for brakes... and I am sanguine about that idea... off-roaders retained drum brakes for a very long time past discs becoming derigeur on tar.... and for good reason, a lot of it 'feel'... properly maintained, well adjusted and with a good cable they can be as effective as a disc, without the sharpness, so you can better modulate braking on an unpredictable surface... plus you dont have pistons to go crusty, or hydraulics to pop seals or anything; far more user-maintainable and repairable.....

But, if you go shopping for a front end; then, you could swap for something with bigger front wheel from trail or off-road donor, opening up wider range of rugged front tyres.

My reccomend though; leave the front end as is; make drum as good as you can, and then experiment with the tyres, but don't get too carried away looking for the most rugged knobly you can get; road-block tread, could be 'enough' while any ultimate lack of gripiness will help you find the limits earlier and help you develop riding for traction; that will help you get best out of any rubber.
____________________
My Webby'Tef's-tQ, loads of stuff about my bikes, my Land-Rovers, and the stuff I do with them!
Current Bikes:'Honda VF1000F' ;'CB750F2N' ;'CB125TD ( 6 3 of em!)'; 'Montesa Cota 248'. Learner FAQ's:= 'U want to Ride a Motorbike! Where Do U start?'
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 16:59 - 19 Apr 2014    Post subject: Reply with quote

Jesus I didn't realise the cg lectricals were that poor.

In that case I'd get just take the entire winding and run it through a normal single-phase regulator/rectifier to try and bring some semblance of sanity into effect.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

humanbeing
Nova Slayer



Joined: 20 Mar 2011
Karma :

PostPosted: 04:19 - 20 Apr 2014    Post subject: Reply with quote

Chinese site sells these goodies:
180W 3-phase stator https://item.taobao.com/item.htm?id=1651715694 / DC-cdi or this thingy https://item.taobao.com/item.htm?id=5279928900 for ur old Cdi/ 3 phase rectifier
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 04:30 - 20 Apr 2014    Post subject: Cool! Reply with quote

I quite like what you have done to your bike. I reckon the P51 paint is cool. I'll tell you what I did to mine then we can both share the abuse Shocked
I bought a CB100n with a weird custom paint job back in 2008 for £200 & couriered it to death. But the paint job grew on me & the little bike handled really well so I swapped the 6volt 99cc lump for a 12volt 125 CG Brazil unit with leccy start (grunt!).
I threw on a couple of part worn Michelin Pilot Sportys (with tubes), fitted a home made chain oiler (plastic bottle filled with old recycled engine oil, length of see thru garden pipe), Rickman fairing, M&P Shorty muffler welded to a rusted old downpipe - (kept the original for MOT day) they hear it coming all right & trust me, you won't damage anything if you keep on top of your valve clearances, massive topbox & pannier combination, very small front sprocket (great acceleration, 55 mph top end - nine points on my license so I can't speed but I can wheelie it like a bugger even with the massive fairing). Then I couriered it to death again & have been thrapping the pi$$ out of it for the last five years 'cos it won't die.
I want to eventually have two complete separate guises for it - full dressed courier & naked cafe - winter & summer (OORacing do a cafe kit for these). Most 125 - 185 XL, CG, CB & a lot of other stuff will fit our bikes too including the XL185 lump & front end if you can find 'em. The longer XL shocks will also fit but you may have to mod the exhaust hanger to stop the swing arm hitting it but they jack the rear up loads.
I love my bike. Carries all my camping shit about to festies. Leave it up the west end for days & no one bothers it. Go anywhere on a fivers worth of juice. The chain oiler is the absolute nuts & I never change C&S, plus it gets rid of all my old oil. My lil Pony has made me so much money I couldn't even begin to count (you never read that tax man).
You're right about the headlight though, they're poo & I should really do sommat with mines. If you want to make the exhaust louder enlarge the little hole at the bottom of the silencer at the rear but do it to the same size as a short fat bolt so you can screw that in it for stealth action or cut the silencer down & fit a CB125s baffle. Car drivers won't hear it but peds will. Best road tyres I found were Sportys but they wear out quick. Best off road were Catspaws for a straight up fit. You can fit fatter tyres but I reckon skinny tyres handle quicker both on/off road. The Turkish CG has a longer swing arm if you do decide to fit a fat rear tyre, I think it will take a 3.50 no bother & it hangs it right out the back but you may need to use a Turkish chain or you could just find out the length & buy some chain off the roll. Can't think of nothing else at the mo but good luck with it... Oh, I forgot that you can fit a 125 Varadero rear wheel, chain & sprocket which turns it into a wheelie monster. I haven't done it but I know a dude who has...
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

smegballs
World Chat Champion



Joined: 28 Oct 2007
Karma :

PostPosted: 04:58 - 20 Apr 2014    Post subject: Reply with quote

Can you get a few pics of your oiler setup? I tried making one years ago and just ended up leaving puddles of oil everywhere I parked Embarassed
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 12:56 - 20 Apr 2014    Post subject: Oiler Reply with quote

My oiler is similar to a Loobman kit. Loobman was/is a Welsh London courier & entrepreneur who used to sell kits from his topbox for a tenner. I think his name is Dennis - he might even be on here somewhere. I just copied his idea & made a few little changes such as using a football air valve to meter the oil. Essentially it was just a small plastic squeezy bottle & three lengths of different sized see thru plastic pipe & some grommets & cable ties. I just had a look & he is still selling 'em here: https://www.loobman.co.uk/ so I don't really want to post up pics in case he litigates me Very Happy
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

simonjay
Derestricted Danger



Joined: 28 Mar 2014
Karma :

PostPosted: 13:27 - 20 Apr 2014    Post subject: Reply with quote

loud exhaust on a cg Laughing
https://i63.photobucket.com/albums/h139/simonjackson1980/Mobile%20Uploads/20140418_125312_zpsvxrc7sd3.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 21:02 - 20 Apr 2014    Post subject: Reply with quote

That pipe is so cool it should be wearing sunglasses!
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

Alpha-9
Super Spammer



Joined: 19 Jan 2012
Karma :

PostPosted: 19:19 - 26 Apr 2014    Post subject: Reply with quote

simonjay wrote:

and no front indies Confused


Need to get tell tale lights workign on LED indis on my CG...any tips?
____________________
Fzr-600 1999
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

simonjay
Derestricted Danger



Joined: 28 Mar 2014
Karma :

PostPosted: 20:15 - 27 Apr 2014    Post subject: Reply with quote

Alpha-9 wrote:
simonjay wrote:

and no front indies Confused


Need to get tell tale lights workign on LED indis on my CG...any tips?


https://i63.photobucket.com/albums/h139/simonjackson1980/Mobile%20Uploads/20140416_143713_zps1qyampum.jpg

i used resisters and they work mint Very Happy
 Back to top
View user's profile Send private message You must be logged in to rate posts

Alpha-9
Super Spammer



Joined: 19 Jan 2012
Karma :

PostPosted: 20:42 - 27 Apr 2014    Post subject: Reply with quote

Neato, did you get idiot lights working on the dash?
____________________
Fzr-600 1999
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

simonjay
Derestricted Danger



Joined: 28 Mar 2014
Karma :

PostPosted: 22:52 - 29 Apr 2014    Post subject: Reply with quote

yup all works as should
____________________
2004 honda XR 125
PROJECT 😁
 Back to top
View user's profile Send private message You must be logged in to rate posts

Alpha-9
Super Spammer



Joined: 19 Jan 2012
Karma :

PostPosted: 17:35 - 30 Apr 2014    Post subject: Reply with quote

simonjay wrote:
yup all works as should

Sorry to keep asking, having trouble with mine you see.
Did you just wire them up to a flasher and plug in behind the headlight as normal or did you have to add another relay or anything?

Thanks

And yes, CG electrics are a dog, piss me off. YBR is about the same.
____________________
Fzr-600 1999
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 202 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.13 Sec - Server Load: 0.21 - MySQL Queries: 16 - Page Size: 161.11 Kb