Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


RMZ250 08-09 VALVE CLEARENCE

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

ste.cameron25
Nova Slayer



Joined: 05 Aug 2013
Karma :

PostPosted: 20:15 - 24 Apr 2014    Post subject: RMZ250 08-09 VALVE CLEARENCE Reply with quote

Hello it's been a while since I been on here. I have been working away. Anyways got myself a rmz250 08-09 modle and the guy I got it off said it's been sat in the lockup for some time. Soooo I cleaned the card got it at a nice idle and new tyers graphics and cupple new gaskets. Bikes starts fine but yeah have to push the kick lever down slowly then let it rise up then kick ot to start! Does that sound normal for a 4 stroke? Also I tuck my valve cover off to mesure the clearance (no good with feeler gauges) manual says intake 0.004-0.006in and exit 0.006-0.009in so i got my feeler gauge out to mesure the clearance seemed spot on to be honest but am no got with maths lol are theys below the rite sizes I should be using cheers in advance
____________________
If you carnt make it then buy it..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :

PostPosted: 10:24 - 25 Apr 2014    Post subject: Reply with quote

Ask Suzuki UK using this link https://www.suzuki-gb.co.uk/ccr/customer-services-feedback-form/
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts
Vincent This post is not being displayed because the poster is banned. Unhide this post / all posts.

ste.cameron25
Nova Slayer



Joined: 05 Aug 2013
Karma :

PostPosted: 11:31 - 25 Apr 2014    Post subject: Reply with quote

Hi thanks for that iam not english still learning the English language sorry. Well now that's cleared up I can carry on with my valves cheers
____________________
If you carnt make it then buy it..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

hmmmnz
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 16:20 - 25 Apr 2014    Post subject: Reply with quote

yeah those are the right feeler gauge sizes

in metric it's
standard IN : 0.09-0.16mm
EX : 0.17-0.24mm

which is surprisingly loose for a bike, exhaust must get pretty hot
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches
 Back to top
View user's profile Send private message You must be logged in to rate posts

ste.cameron25
Nova Slayer



Joined: 05 Aug 2013
Karma :

PostPosted: 16:29 - 25 Apr 2014    Post subject: Reply with quote

My intake I can only get a .006 in my ex I can fit a. 013 in Iam trying to understand the valves as best as I can so I can reshim. Manual says intake. 004-006 and ex. 006-009 is my intake okay to leave as it is and does my exit need a smaller shim to knock it down to 009 exhaust does not get verry hot but normal specs if you know what I mean.
____________________
If you carnt make it then buy it..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

hmmmnz
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 12:52 - 26 Apr 2014    Post subject: Reply with quote

yeah id leave the intake shim and just change the exhaust shim
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches
 Back to top
View user's profile Send private message You must be logged in to rate posts

ste.cameron25
Nova Slayer



Joined: 05 Aug 2013
Karma :

PostPosted: 13:22 - 26 Apr 2014    Post subject: Reply with quote

Thanks for the reply. I was looking at my can timing and seen that I have 13 links from 12 o'clock ex cam looks to be bang on 9 o'clock but the intake seems to be one down at 4 o'clock would this make a difference do I need to counter clockwise the intake by one tooth so it's at 3 o'clock.one last thing is. 013 a big gap for exhaust cam cheers
____________________
If you carnt make it then buy it..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ste.cameron25
Nova Slayer



Joined: 05 Aug 2013
Karma :

PostPosted: 17:59 - 26 Apr 2014    Post subject: Reply with quote

Okay so i mesured my exhaust clearance go and it's .013 mesured my shim and that's 1.42 so looked on manual and it says I need a 1.250 is this rite
____________________
If you carnt make it then buy it..
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 208 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.38 - MySQL Queries: 16 - Page Size: 63.14 Kb