Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Retro Cannondale project.

Reply to topic
Bike Chat Forums Index -> The Cycling Forum
View previous topic : View next topic  
Author Message

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 14:43 - 04 May 2015    Post subject: Retro Cannondale project. Reply with quote

I much prefer the riding position on old bikes and I have a particular like of old Cannondales from 1989 onwards.
Among the various bits I have packed away is an 18" Cannondale MTB frame from 1990 which is the perfect size for me.
I recently managed to pick up another frame (extremely small 14") with a set of Pepperoni Aluminium forks for £49. The forks being the genuine Cannondale ones of the era with the steerer cut to the correct length for an 18" frame.

I also have an almost original Specialized Stumpjumper from 1989 that I got for free with a mixture of DX and XT but the frame is a 22" so unusable for most normal size people, nearly all the parts will be swapped over to this frame to create a cheap usable quality bike. In fact even the headset if it is any good will be used on the 14" frame just so the forks don't fall out of it in storage.

After a dry build the frame will be powder coated, not sure what colour yet and re-decaled so should look pretty original not that originality is the plan.

So far the bottom bracket has been fitted as well as the forks using a Stronglight A9 headset and a bottom race neoprene seal. A 135mm Girvin flexstem has also been added. The seatpost will probably be replaced with either a suspension type or a 350mm Kalloy.

At the moment it looks like this.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150504_130149.jpg

To give you an idea of the size of the frame going into storage.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150504_132640.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

stinkwheel
Bovine Proctologist



Joined: 12 Jul 2004
Karma :

PostPosted: 16:35 - 04 May 2015    Post subject: Reply with quote

I'm going to go ahead and presume, given the general cleanliness of that kitchen which suggests it is not in regular use as a bicycle workshop, that you've been left by yourself over the weekend. Laughing
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 19:25 - 04 May 2015    Post subject: Reply with quote

Not left alone. The kitchen is generally that tidy even though I use it as a workshop. Today we have been doing house work so I decided to assemble the bits together to get them out of the way before we cleaned the kitchen.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 21:16 - 04 May 2015    Post subject: Reply with quote

There is some damage to the frame that will need cleaning up before powder coating. Scrapes on the top tube and chain suck. It's not too bad but will need dressing.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150504_204638.jpg

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150504_204629.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 18:14 - 05 May 2015    Post subject: Reply with quote

Thought I'd take a photo with wheels and tyres on just to see the proportions and how it looks.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150505_180708.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 23:50 - 05 May 2015    Post subject: Reply with quote

Let me know where you go for powder coat and how much is costs I've a frame and forks that need doing too.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 23:57 - 05 May 2015    Post subject: Reply with quote

About £70 at Armourtex.
 Back to top
View user's profile Send private message You must be logged in to rate posts

spnorm
Crazy Courier



Joined: 18 Aug 2007
Karma :

PostPosted: 22:01 - 10 May 2015    Post subject: Reply with quote

I've still got a 1991 Trek 970 mountain bike at my parents house which I've owned since new. It's very original and has a U.S. Made steel frame and the paintwork is still in very good condition Cool

I sometimes think I should sell it as there's a market for retrobikes, but it has a lot of sentimental value
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 14:41 - 05 Jun 2015    Post subject: Reply with quote

A little bit further along with this.

A new Cannondale seat for £15 from Evans and a set of BBB Skybars as I'm getting old.
The Deore thumbshifters are fitted along with 2 finger Deore brake levers. Also fitted a Deore Chainset with new 48 tooth chainring.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150605_140546.jpg


Last edited by sickpup on 18:32 - 28 Jul 2015; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 15:01 - 05 Jun 2015    Post subject: Reply with quote

What's the funky stem?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 15:18 - 05 Jun 2015    Post subject: Reply with quote

Its an old school flex-stem with an elastomer to absorb road shock. Not suspension as such but an added comfort thing.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 21:18 - 13 Jun 2015    Post subject: Reply with quote

Started cabling it up

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/IMG-20150613-WA0000.jpeg
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 16:56 - 22 Jun 2015    Post subject: Reply with quote

A couple more pics of the work on it.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150622_164127.jpg

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150622_164104.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 17:18 - 28 Jul 2015    Post subject: Reply with quote

Ran in to an odd problem, the sort you get when working on old bikes. The frame the bits were removed from had a 130mm spacing on the rear drop outs and the cannondale frame has 135mm spacing, its best not to pull aluminium frames in so it needs a new rear axle.
Luckily the M732 rear hub was a transition year and was available in both 130 and 135 spacing so off to ebay and there was a seller with NOS 135mm axles, once delivered I stripped down the hub and discovered that after 26 years or so the bearing and cones were perfect.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150728_164557.jpg

Heres the new axle beside the original, only slightly longer but enough longer.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20150728_164249.jpg

A quick regrease with bearing grease and the hub is back together, now the rear wheel needs redishing 2.5 towards non-drive side.
 Back to top
View user's profile Send private message You must be logged in to rate posts

UnknownStuntm...
World Chat Champion



Joined: 13 Sep 2007
Karma :

PostPosted: 17:32 - 28 Jul 2015    Post subject: Reply with quote

sickpup wrote:
The frame the bits were removed from had a 130mm spacing on the rear drop outs and the cannondale frame has 135mm spacing, its best not to pull aluminium frames in so it needs a new rear axle.

I know of two people who successfully 'claimed' on Cannondale's lifetime warranty by inserting threaded rod, washers and nuts between the dropouts and tightening. Surprising just how far they go before they let go.

I couldn't bring myself to go through with it.

Loves it, I do.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 00:21 - 11 Oct 2015    Post subject: Reply with quote

Finally finished putting this together and have taken it out for a couple of small rides to the shops. It doesn't have the correct rear wheel in it, I've yet to re-dish it but it makes a nice simple bike with a good ride. None of this heavy weight suspension that seems to plague modern bikes so it is nice, light and comfortable to ride.

Next I have to strip it down and get it powder coated but I think that can wait until I am bored in the new year. At the moment I am happy for it to look the way it does, slightly rough but very old school.

https://i945.photobucket.com/albums/ad297/750RK/Bicycle/20151010_092416.jpg

Final spec is Deore throughout with a Deore XT rear mech.
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 11:56 - 29 Oct 2015    Post subject: Reply with quote

The rear wheel is changed and I've used it a few times now. It rides well and is remarkably spritely in its acceleration and handling.
One problem has appeared, the bottom bracket is too short so you can't shift onto the bottom ring. Not a problem on the road but could be a problem if I ever take it off road so will need to sort this out when I get a chance but at the moment I am just enjoying using it.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 8 years, 153 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Cycling Forum All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.13 - MySQL Queries: 17 - Page Size: 99.35 Kb