Wiring help needed

[Speerzie]

Hi all, I’m new here so if it’s in the wrong place I’m sorry!

I’ve got a Kawasaki gpx750r that I’m putting back together out of boxes and am at the stage of fitting the wiring loom, I got a new igniter unit as it was missing but have just found that the wiring plug was cut off the loom and obviously gone with it, rest of the loom looks good, but after several evenings of googling I can’t find a pinout for it, can anyone help me out? All I need to know is what colour wire goes to what pin on the unit,

Thanks in advance
Luke

[jaffa90]

Any good?

https://www.classiccycles.org/1852/597943.html

[Speerzie]

Thanks, but that’s the same diagram I keep finding online, it doesn’t help me with what wire goes to what pin unfortunately

[WD Forte]

Buy this

https://www.ebay.co.uk/itm/KAWASAKI-GPX750-WIRING-LOOM-GPX750-WIRING-HARNESS-GPX-750-LOOM-HEAD-LIGHT-LOOM/382279050591?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D2%26asc%3D51875%26meid%3D2b26ae8fceef433590f71236d7dfc9d4%26pid%3D100005%26rk%3D5%26rkt%3D12%26sd%3D372055913662%26itm%3D382279050591&_trksid=p2047675.c100005.m1851

You can make a good harness from the two rather than bodge it.
the plug top right is the igniter one
https://i.ebayimg.com/images/g/DCAAAOSwMM9bFWpS/s-l1600.jpg
____________________
bikers smell of wee