15 Plate WK 125 sport ignition help

dubloman · Derestricted Danger Joined: 11 Nov 2015 Karma :

The above bike was stolen and recovered and one of the issues is the ignition wires have been yanked and they tried to hot wire it but couldn't get it started. They had two bikes that night and we recovered them both as they could not start them.

The police found them pushing it down the main road and when the police got close, they dropped it and legged it, masked up and gloves.

They damaged the bracket on the N/S riders foot peg/gear selector, this is cast ally and I can't find one.

I also need to know the wiring (take a picture of the back of the ignition) so I can re-solder the wires in the correct order.

If you can help and can send me a picture if the back of the ignition, I would be grateful. I have a wiring diagram, but it does not show what wire goes on what tab.

If anyone has a bracket can you let me know as we could certainly use it. The bike is used for work and time is critical

Thanks in advance