RC valve - parts missing

[Prottecttor]

Hello,

This is on my NSR 125. There is one wire going out from RC valve but it connects to nothing. It should go where there are wire spots marked on Photo right? And another one coming back? Where this should be connected. I bought it like this idk what to do
RC valve https://imgur.com/gallery/HUxYoYN

[jaffa90]

Try google,
https://www.youtube.com/watch?v=BlelJrdLt9A

[Prottecttor]

I saw this clip - that's how i figured i am missing something. Thing is i do not know how what to do. What part are this wires called? Where to get them? Where are they connected and to what?

[-]

There should be 2 cables so it can pull the valve both ways. The bit you circled on the right is where the plastic cable surround should sit. I take it you know the rc valve is in the exhaust port side of the barrel? The part you're looking at is the servo motor which should drive the cables to turn the RC valve as the revs change.

I’m amazed you need to ask that in the first place and it doesn’t fill me with confidence about what you might have missed for your other problem of no starting.

Are you sure a ring hasn’t gone and jammed the rc valve, causing it to ping the cables off?

https://www.ebay.co.uk/itm/Honda-NSR125-1993-2001-NEW-O-E-RC-Exhaust-Power-Valve-Cable-A-NOS-NSR-125/232913086610?hash=item363ab3a892:g:sSMAAOSwJbpbiwCw
____________________
TZR250 2MA road, TZR250 1KT road, TZR250 2MA race, TDR250, YZF-750R Boost colours.
Jaguar S Type 3.0 V6 Sport R, VW Transporter T5 GP LWB Shuttle 140ps DSG.