Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


yamaha wr125 r 2011 clutch cover oil seals

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

squbany
L Plate Warrior



Joined: 28 Mar 2020
Karma :

PostPosted: 17:39 - 28 Mar 2020    Post subject: yamaha wr125 r 2011 clutch cover oil seals Reply with quote

Hi im new in bike world...
need to replace oil seal with is in clutch side cover.
but canot find right one
anoyone hire replace that before and can help me find right one???
yamaha wr125r 2011 thanks. Rolling Eyes Rolling Eyes Rolling Eyes
____________________
SQUBANY
 Back to top
View user's profile Send private message You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :

PostPosted: 18:58 - 28 Mar 2020    Post subject: Re: yamaha wr125 r 2011 clutch cover oil seals Reply with quote

squbany wrote:
Hi im new in bike world...
need to replace oil seal with is in clutch side cover.
but canot find right one
anoyone hire replace that before and can help me find right one???
yamaha wr125r 2011

Do you mean you can't actually find one, or that there are two possibilities? The size of the seal, which is very likely to be a general buy-anywhere off the shelf thing used for lots of things will be moulded into the rubber of the seal.
 Back to top
View user's profile Send private message You must be logged in to rate posts

squbany
L Plate Warrior



Joined: 28 Mar 2020
Karma :

PostPosted: 12:09 - 29 Mar 2020    Post subject: neeed exactly this one from picture Reply with quote

Hi any one know from wher i can order or what size it is canot find right one on ebay. thanks
PICTURE WITH ENGINE COVER SHOWS PLACE WITH OIL SEALS WITH NEDED
____________________
SQUBANY
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 12:29 - 29 Mar 2020    Post subject: Reply with quote

Looks to be part no 18,

https://www.fowlersparts.co.uk/parts/4235836/wr125r-22b5-2011-060-a/crankcase-cover-1
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :

PostPosted: 12:50 - 29 Mar 2020    Post subject: Re: neeed exactly this one from picture Reply with quote

squbany wrote:
what size it is canot find right one on ebay. thanks


What's the exact problem? You can't do the search, or the search does not find one?

From your picture, it looks as though you push it out from the outside inwards. Then look at the sizes marked on it. Then order a new one the same.

You could measure the outside diameter of the seal (a steel tape or rule is probably good enough), and the diameter of the shaft, to confirm which to order IF there are a couple of possibilities and you can't decide which.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 12:54 - 29 Mar 2020    Post subject: Reply with quote

Il cost 5 quid plus delivery from fowlers.

Why are you looking on ebay for something that costs pennies from a main dealer?
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :

PostPosted: 13:09 - 29 Mar 2020    Post subject: Reply with quote

Nobby the Bastard wrote:
Il cost 5 quid plus delivery from fowlers.

Why are you looking on ebay for something that costs pennies from a main dealer?

It can be more expensive on eBay. You probably know that. I don't understand the problem, he posted a picture but didn't give links or say why they didn't fit. If the case is off, he could just measure the poxy thing, or read the size off it to make sure. Google shows various results. It's a pretty standard engine that goes into various things (including Rieju RS3s I think; same as YZF-R125?). May be part#931021222400.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 13:18 - 29 Mar 2020    Post subject: Reply with quote

He probably jammed it in without showing any mechanical sympathy.


A little oil rubbed round the outside and then gently easing it and it'll fit.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

steve the grease
Crazy Courier



Joined: 26 Jan 2018
Karma :

PostPosted: 17:03 - 29 Mar 2020    Post subject: Reply with quote

You have showed us 2 seals , they are both 35mm outside diameter, one has a hole 17mm diameter , one has a hole 24mm diameter. One is 7 and one 8mm thick , irrelevant really .
So it's 17mm OR 24mm

You are in a much better posiition to tell us which one fits. 17/24 it's quite a big difference.
What is the diameter of the shaft that runs in the seal?
____________________
All the above is my personal opinion, you can see my lips move, but I'm talking out of my arse.
I've been riding, and fixing , bikes for 50 years, in that time the more I learn, the less I am absolutely sure of.....
 Back to top
View user's profile Send private message You must be logged in to rate posts

squbany
L Plate Warrior



Joined: 28 Mar 2020
Karma :

PostPosted: 17:15 - 29 Mar 2020    Post subject: ... Reply with quote

OK so picture witch i show are from google so i canot measure.
i read that this seal its important for crankshaft thats why want to replace , and need to take out clutch cover anyway (dont ask why)
i dont mind its cost 5 or 10 but always when try to find its shows OIL SEAL for GEAR LEVER. dont think thats the right one thats why want to ask.
i order all ready nr18 so will see in few days thanks all. Thumbs Up
ps. i will be ok with replace. Laughing
____________________
SQUBANY
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 17:32 - 29 Mar 2020    Post subject: Reply with quote

The one in your picture is the gear lever seal.....
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 21:00 - 29 Mar 2020    Post subject: Reply with quote

It's also not the casing for the clutch side.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts

squbany
L Plate Warrior



Joined: 28 Mar 2020
Karma :

PostPosted: 21:48 - 29 Mar 2020    Post subject: Reply with quote

of course its cover from clutch side! if you dont have nothing smart to say, stay quaiet Rolling Eyes Rolling Eyes Idea
____________________
SQUBANY
 Back to top
View user's profile Send private message You must be logged in to rate posts

Nobby the Bastard
Harley Gaydar



Joined: 16 Aug 2013
Karma :

PostPosted: 22:25 - 29 Mar 2020    Post subject: Reply with quote

squbany wrote:
of course its cover from clutch side! if you dont have nothing smart to say, stay quaiet Rolling Eyes Rolling Eyes Idea


So the clutch is near side. My mistake. I've never come across one on that side. It doesnt alter the fact that the seal is for the gear lever shaft.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 4 years ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.44 - MySQL Queries: 17 - Page Size: 92.46 Kb