Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Calipers and tyres?

 Reply to topic
Bike Chat Forums Index -> The Cycling Forum Goto page Previous  1, 2, 3
View previous topic : View next topic  
Author Message

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :
PostPosted: 12:11 - 05 Aug 2020    Post subject: Reply with quote
kramdra wrote:
The front deraileur and shifters are expecting the sprockets in a certain place. If the set have a narrower spacing, it wont line up.

They will line up, the spacing setup on the chainset is the same for chainsets with seven, eight or nine speed chains. I hope that kind of makes sense?

kramdra wrote:
Ages and ages if I dont ride it? Ive done under 500 miles on this bike, it was used but dont think it had done much when I got it.

If it's not being ridden then assuming the chain is lubed it's not going to make any difference to how long the drivetrain components last.

To be honest, the chainrings on your crankset don't look very worn to me and so I don't think they need replacing. With any luck stinkwheel or sickpup will look at this thread and give their opinion to confirm or correct what I'm saying. Smile
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :
PostPosted: 12:59 - 05 Aug 2020    Post subject: Reply with quote
Ordered anyway, thanks for the help.

I do think the rollers were recent. I rarely had problems until recently it has got much worse, and suprisingly much worse with the new chain and rear sprockets. I was happy to ride it, now I consider it dangerous.

I have properly tensioned the chain link. I could not find one on the old chain, they all look identically riveted. Factory fitted chain?

What else would cause the chain to slip or jump off?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :
PostPosted: 13:06 - 05 Aug 2020    Post subject: Reply with quote
Which Decathlon Btwin chain did you get?

https://www.decathlon.co.uk/C-2438049-bike-chains/N-398753-brand~btwin
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :
PostPosted: 13:14 - 05 Aug 2020    Post subject: Reply with quote
https://www.decathlon.co.uk/3-to-8-speed-bike-chain-id_8298688.html

Identical to the "KNG Narrow" stamped thing that was on there before.
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :
PostPosted: 08:40 - 08 Aug 2020    Post subject: Reply with quote
All fitted. I also shortened the chain by 4 links as I think it was a bit long. This will stop it going big to big cog, jams if you try, but that is something Id never use.

Much better, did 30km last night no problems.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :
PostPosted: 11:04 - 10 Aug 2020    Post subject: Reply with quote
If you set the length of the chain correctly then your quality of bike will improve. Wink

https://www.parktool.com/blog/repair-help/chain-length-sizing
 Back to top
View user's profile Send private message You must be logged in to rate posts

weasley
World Chat Champion



Joined: 16 Oct 2010
Karma :
PostPosted: 11:18 - 10 Aug 2020    Post subject: Reply with quote
kramdra wrote:
This will stop it going big to big cog, jams if you try, but that is something Id never use.

You don't plan to use big-big, but that one day you forget and try for it... hope you're not too far from home.

A proper length chain should be able to select every gear option, even those that are not recommended. All my double- and triple-ring bikes will select big-big and small-small.
____________________
Yamaha XJ600 | Yamaha YZF600R Thundercat | KTM 990 SMT | BMW F900XR TE
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :
PostPosted: 05:19 - 18 Aug 2020    Post subject: Reply with quote
One more adjustment is needed. Since the upgrades, going direct 2-8 to 3-8, pushes the chain over the big cog into the plastic guard, what would be 4-8, I loose all drive and speed and have to go back to 2. This does not happen if I were in 2-6, it changes perfectly.

Tried adjusting the H screw and cable tension, no help. Ideas?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ste
Not Work Safe



Joined: 01 Sep 2002
Karma :
PostPosted: 08:28 - 18 Aug 2020    Post subject: Reply with quote
You've set the H screws on both derailleurs?
 Back to top
View user's profile Send private message You must be logged in to rate posts

weasley
World Chat Champion



Joined: 16 Oct 2010
Karma :
PostPosted: 09:02 - 18 Aug 2020    Post subject: Reply with quote
Sounds like you need to screw the H adjuster on the FD in a touch.
____________________
Yamaha XJ600 | Yamaha YZF600R Thundercat | KTM 990 SMT | BMW F900XR TE
 Back to top
View user's profile Send private message You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :
PostPosted: 13:44 - 18 Aug 2020    Post subject: Reply with quote
Ste wrote:
You've set the H screws on both derailleurs?


Have not touched the rear H screw, it seems in line with the cog, problem is at the front. This started directly after swapping the front crankset. I'll measure them in a bit see if they have a different total width.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 4 years, 220 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Cycling Forum All times are GMT
Goto page Previous  1, 2, 3
Page 3 of 3

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.05 Sec - Server Load: 0.17 - MySQL Queries: 17 - Page Size: 72.05 Kb