Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Anyone any good at soldering...

Reply to topic
Bike Chat Forums Index -> The Workshop Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 11:46 - 16 Oct 2020    Post subject: Anyone any good at soldering... Reply with quote

circuit boards and up for some work, I'm happy to pay?

Got a few of these controllers for heated jackets and they either need new thermal fuses, top right in the picture or new on/off switches on the left.

Anyone got the skills to sort these out? I can supply the fuses and switches.

https://cdn.bcf.44bytes.net/files/20201016_114042.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 13:44 - 16 Oct 2020    Post subject: Reply with quote

How many is a few?

If it's literally just 3 or 4 of them I can ask one of my electronics guys to do it when they have a quiet few minutes.

I come through your sort of way on my commute or you could drop them to the museum if you're ever in South Ken.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 13:50 - 16 Oct 2020    Post subject: Reply with quote

It would be 2,3 or 4. Got a few each with asingle fault, quite happy to buy your chap a few beers for the work or pay him some cash in an Oliver North style.

Won't be for a couple of weeks, about to start a 12 night shift.

Thanks for the offer, it's appreciated. I'll get back to you over it Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 13:53 - 16 Oct 2020    Post subject: Reply with quote

Sure, fyi I'm in Hong Kong for work for the best part of three weeks from the 31st October.

I can probably still sort something out from there as I'll still be in contact with my team, but it would be much easier to arrange before or after then if possible.
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 14:31 - 16 Oct 2020    Post subject: Reply with quote

c_dug wrote:
Sure, fyi I'm in Hong Kong for work for the best part of three weeks from the 31st October.

I can probably still sort something out from there as I'll still be in contact with my team, but it would be much easier to arrange before or after then if possible.


After would be fine, I have 12 day shifts all the way through to April so no rush.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :

PostPosted: 16:59 - 16 Oct 2020    Post subject: Reply with quote

I recently bought myself a Chinesium desoldering iron - hollow tip, solder suck built into the handle - and it works quite well. Any particular reason you don't want to do this yourself?
____________________
Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

oilyrag
Nova Slayer



Joined: 07 Oct 2020
Karma :

PostPosted: 18:01 - 16 Oct 2020    Post subject: Reply with quote

With a cheap iron and some lead solder you could easily replace those two parts yourself.
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 18:25 - 16 Oct 2020    Post subject: Reply with quote

I get the point about DIY being possible, but the alternative I've offered is a repair FOC by one of my very experienced electronics engineers (of which I have 4 working for me), part of our recruitment process is literally PCB component replacement. DIY would seem a silly choice in comparison? Laughing
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

TbirdX
Crazy Courier



Joined: 06 Dec 2015
Karma :

PostPosted: 18:32 - 16 Oct 2020    Post subject: Reply with quote

Which museum c_dug?
____________________
VFR800X - TTR250
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 18:59 - 16 Oct 2020    Post subject: Reply with quote

Science
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jeffyjeff
World Chat Champion



Joined: 02 May 2020
Karma :

PostPosted: 23:48 - 16 Oct 2020    Post subject: Reply with quote

sickpup wrote:
quite happy to buy your chap a few beers for the work or pay him some cash in an Oliver North style.

What this? As I recall, Oliver North became well-known for his skill at driving a shredder, lol.
____________________
History shows again and again how nature points out the folly of men - BOC
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

WD Forte
World Chat Champion



Joined: 17 Jun 2010
Karma :

PostPosted: 01:30 - 17 Oct 2020    Post subject: Reply with quote

C-dug's guys would probably check and reflow those mosfets as well
some rough looking joints on those.
With all those through holes, I wonder what's on the other side of the PCB,
some PWM control or similar circuitry to drive the mosfets I'd guess.
____________________
bikers smell of wee
 Back to top
View user's profile Send private message You must be logged in to rate posts

TbirdX
Crazy Courier



Joined: 06 Dec 2015
Karma :

PostPosted: 09:39 - 17 Oct 2020    Post subject: Reply with quote

c_dug wrote:
Science


Just wondered, I've spent a fair bit of time working in the V&A myself.
____________________
VFR800X - TTR250
 Back to top
View user's profile Send private message You must be logged in to rate posts

ThatDippyTwat
World Chat Champion



Joined: 07 Aug 2016
Karma :

PostPosted: 10:01 - 17 Oct 2020    Post subject: Reply with quote

oilyrag wrote:
With a cheap iron and some lead solder you could easily replace those two parts yourself.

Thermal fuses can be a royal pain to replace, depending on the temp they're set to blow at. Wave soldering (how they're manufactured) typically doesn't get them hot enough to blow, but your average bloke with an iron will usually kill them outright.
You usually solder in some sort of plug/socket and crimp them into that to effect DIY repairs.
The switches are a straight replacement and commonly available.
____________________
'98 VFR800 (touring) - '12 VFR800 Crosrunner (Commuting) - '01 KDX220 (Big Green Antisocial Machine)
 Back to top
View user's profile Send private message You must be logged in to rate posts

Easy-X
Super Spammer



Joined: 08 Mar 2019
Karma :

PostPosted: 12:13 - 17 Oct 2020    Post subject: Reply with quote

c_dug wrote:
I get the point about DIY being possible, but the alternative I've offered is a repair FOC by one of my very experienced electronics engineers (of which I have 4 working for me), part of our recruitment process is literally PCB component replacement. DIY would seem a silly choice in comparison? Laughing


I'm a great believer in self-reliance but then again I'm a great believer in any old excuse for beer to make an appearance Very Happy
____________________
Husqvarna Vitpilen 401, Yamaha XSR700, Honda Rebel, Yamaha DT175, Suzuki SV650 (loan) Fazer 600, Keeway Superlight 125, 50cc turd scooter
 Back to top
View user's profile Send private message You must be logged in to rate posts

oilyrag
Nova Slayer



Joined: 07 Oct 2020
Karma :

PostPosted: 13:23 - 17 Oct 2020    Post subject: Reply with quote

ThatDippyTwat wrote:
oilyrag wrote:
With a cheap iron and some lead solder you could easily replace those two parts yourself.

Thermal fuses can be a royal pain to replace, depending on the temp they're set to blow at. Wave soldering (how they're manufactured) typically doesn't get them hot enough to blow, but your average bloke with an iron will usually kill them outright.
You usually solder in some sort of plug/socket and crimp them into that to effect DIY repairs.
The switches are a straight replacement and commonly available.


Good point. I didn't think about that
 Back to top
View user's profile Send private message You must be logged in to rate posts

c_dug
Super Spammer



Joined: 04 Sep 2007
Karma :

PostPosted: 15:12 - 17 Oct 2020    Post subject: Reply with quote

TbirdX wrote:
c_dug wrote:
Science


Just wondered, I've spent a fair bit of time working in the V&A myself.


Ah cool, I know a few of their technicians. What do you do?
____________________
I am a bellend, I am a man of constant sorrow, I am a gummy bear, I am a rock.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

colinM
Two Stroke Sniffer



Joined: 02 Oct 2020
Karma :

PostPosted: 17:25 - 17 Oct 2020    Post subject: Reply with quote

I see a few people have already replied to this but I do electronics repair as a hobby I have a full setup for doing soldering work (professional irons,hot air stations, microscopes etc)

this looks like a pretty simple job.

I'm in Scotland
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

ThatDippyTwat
World Chat Champion



Joined: 07 Aug 2016
Karma :

PostPosted: 18:11 - 17 Oct 2020    Post subject: Reply with quote

colinM wrote:
I see a few people have already replied to this but I do electronics repair as a hobby I have a full setup for doing soldering work (professional irons,hot air stations, microscopes etc)

this looks like a pretty simple job.

I'm in Scotland


Thermal Fuses. Probably not straightforward.

Sickpup - What temp is specified on the fuse?
____________________
'98 VFR800 (touring) - '12 VFR800 Crosrunner (Commuting) - '01 KDX220 (Big Green Antisocial Machine)
 Back to top
View user's profile Send private message You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 19:34 - 17 Oct 2020    Post subject: Reply with quote

Easy-X wrote:
I recently bought myself a Chinesium desoldering iron - hollow tip, solder suck built into the handle - and it works quite well. Any particular reason you don't want to do this yourself?


I don't have the soldering skills a the moment or the time to learn due to the excessive hours I'm working.
The controllers can't easily be replaced, they haven't made them for over 10 years so I can't really risk learning on the job with them and to replace with alternatives would cost about £60 each and not work so well.

Oli North was the king of the clandestine back hander.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :

PostPosted: 20:37 - 17 Oct 2020    Post subject: Reply with quote

ThatDippyTwat wrote:

Thermal Fuses. Probably not straightforward.

Sickpup - What temp is specified on the fuse?


Simple enough, you use a clip on heat shunt on the lead next to the component - a bit like miniature self closing tweezers. You also work quickly. The first precaution is belt and braces, working quickly means that the fuse won't get that hot anyway. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

TbirdX
Crazy Courier



Joined: 06 Dec 2015
Karma :

PostPosted: 20:49 - 17 Oct 2020    Post subject: Reply with quote

Quote:


Ah cool, I know a few of their technicians. What do you do?


Contractor, look after the biometric access control and other security stuff.[/quote]
____________________
VFR800X - TTR250
 Back to top
View user's profile Send private message You must be logged in to rate posts

colinM
Two Stroke Sniffer



Joined: 02 Oct 2020
Karma :

PostPosted: 01:39 - 18 Oct 2020    Post subject: Reply with quote

Islander wrote:
ThatDippyTwat wrote:

Thermal Fuses. Probably not straightforward.

Sickpup - What temp is specified on the fuse?


Simple enough, you use a clip on heat shunt on the lead next to the component - a bit like miniature self closing tweezers. You also work quickly. The first precaution is belt and braces, working quickly means that the fuse won't get that hot anyway. Thumbs Up


👍 You can also pre-heat the board to make the process quicker, thermal shunt/heatsink like you suggest. They also usually have a few seconds at soldering temp for installation which will be documented in the datasheet.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

sickpup
Old Timer



Joined: 21 Apr 2004
Karma :

PostPosted: 15:07 - 18 Oct 2020    Post subject: Reply with quote

ThatDippyTwat wrote:
Sickpup - What temp is specified on the fuse?


196
 Back to top
View user's profile Send private message You must be logged in to rate posts
kramdra This post is not being displayed because it has a low rating (Abusive). Unhide this post / all posts.
Old Thread Alert!

The last post was made 3 years, 162 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.22 - MySQL Queries: 17 - Page Size: 135.23 Kb