HELP EMERGENCY!!!

[jackass1019]

So I tried to change my sparkplu on my peugeot speedfight 3 darkside and I dropped the sparkplu into the plastic casing bit on the side that leads to the fly wheel. I put the old on back in and started it up and doesn't seem to have broken it but I was wondering will the plug fall down into that fly wheel bit and mess my bike up? I feel like such an idiot! any help appreciated!
____________________
Pete

[Nobby the Bastard]

If there is the potential for it to contact the flywheel (or any of the mechanical or electrical parts) then the answer is quite obvious.

No doubt you just want to have someone say it will be fine rather than you sorting g the problem properly.
____________________
trevor saxe-coburg-gotha:"Remember this simple rule - scooters are for men who like to feel the breeze on their huge, flapping cunt lips."
Sprint ST 1050

[MarJay]

I've no idea where you mean... The flywheel and all the driveline are encased in metal, so it's probably sitting on the side of the engine in between the cases and the plastic fairing?

My advice is buy beg or borrow a magnet on a stick (or put a magnet on a piece of string) and fish it out that way.
____________________
British beauty: Triumph Street Triple R; Loony stroker: KR1S; Track fun: GSXR750 L1; Commuter Missile: GSX-S1000F
Remember kids, bikes aren't like lego. You can't easily take a part from one bike and then fit it to another.

[jackass1019]

Yeah I thought so, I feel like such an idiot with it being such a simple job but it just slipped out the tool and fell down the shaft connecting with the fly wheel bits... I have a friend coming up now who has a magnet on a stick hahah
____________________
Pete

[jeffyjeff]

looks like only 7 screws to get the cover off to fish out the plug.
____________________
History shows again and again how nature points out the folly of men - BOC