Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Cutting MFC

 Reply to topic
Bike Chat Forums Index -> Dear Auntie BCF...
View previous topic : View next topic  
Author Message

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 13:09 - 04 Dec 2020    Post subject: Cutting MFC Reply with quote
All

I am part way through cutting some kitchen units to size. I can get a decent edge on the MFC material using a sharp, fine-pitch hand saw using making tape to reduce chipping but it only seems effective on the down stroke side, on the other side I get some chips.

It's not hyper critical but I want to do the best job I can so if I'm missing a trick somewhere please let me know.
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

piazza
Brolly Dolly



Joined: 23 Aug 2008
Karma :
PostPosted: 13:39 - 04 Dec 2020    Post subject: Reply with quote
I use a palm router for laminate sheets, it can cut 0.8mm unmounted laminate no problem.
 Back to top
View user's profile Send private message You must be logged in to rate posts

panrider_uk
World Chat Champion



Joined: 23 Sep 2007
Karma :
PostPosted: 13:49 - 04 Dec 2020    Post subject: Reply with quote
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.
____________________
Current bike: Honda ST1100
 Back to top
View user's profile Send private message You must be logged in to rate posts

grr666
Super Spammer



Joined: 16 Jun 2014
Karma :
PostPosted: 14:04 - 04 Dec 2020    Post subject: Reply with quote
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.

This....

https://www.toolstation.com/trend-t101br-down-cut-jigsaw-blade/p41772
____________________
Currently enjoying products from Ford, Mazda and Yamaha
Ste wrote: Avatars are fine, it's signatures that need turning off. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 14:37 - 04 Dec 2020    Post subject: Reply with quote
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.


Well you learn something new every day Thumbs Up Karma
 Back to top
View user's profile Send private message You must be logged in to rate posts

panrider_uk
World Chat Champion



Joined: 23 Sep 2007
Karma :
PostPosted: 14:50 - 04 Dec 2020    Post subject: Reply with quote
Islander wrote:
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.


Well you learn something new every day Thumbs Up Karma


Every day's a school day here Smile
____________________
Current bike: Honda ST1100
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 14:51 - 04 Dec 2020    Post subject: Reply with quote
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.


Tricky cutting straight lines with a jig saw - even using a guide..
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts

panrider_uk
World Chat Champion



Joined: 23 Sep 2007
Karma :
PostPosted: 15:25 - 04 Dec 2020    Post subject: Reply with quote
A100man wrote:
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.


Tricky cutting straight lines with a jig saw - even using a guide..


I agree
____________________
Current bike: Honda ST1100
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 16:05 - 04 Dec 2020    Post subject: Re: Cutting MFC Reply with quote
A100man wrote:
I am part way through cutting some kitchen units to size. I can get a decent edge on the MFC material using a sharp, fine-pitch hand saw using making tape to reduce chipping but it only seems effective on the down stroke side, on the other side I get some chips.

[GLOOM]

It's 'orrible stuff. You could, if neccessary, cut near to the line, using your saw, and then clamp up a couple of straight battens and go at it with a belt sander. I doubt you will get a very good finish with a saw, but you could try clamping up batten on the line and saw to that, which might reduce blade flex and edge chipping. I have heard of people scoring each side of the board on the line, but. A router and an TCT bit?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Riejufixing
World Chat Champion



Joined: 24 Jun 2018
Karma :
PostPosted: 16:09 - 04 Dec 2020    Post subject: Reply with quote
A100man wrote:
Tricky cutting straight lines with a jig saw - even using a guide..

Plus MFC tends to be full of all sorts of bits of crap like grit and bits of metal rubbish which will take the edge off your blade's teeth. Then it will want to cut curves. It's horrid stuff to cut.
 Back to top
View user's profile Send private message You must be logged in to rate posts

MCN
Super Spammer



Joined: 22 Jul 2015
Karma :
PostPosted: 19:19 - 04 Dec 2020    Post subject: Reply with quote
I thought MCF flounced months ago?
____________________
Disclaimer: The comments above may be predicted text and not necessarily the opinion of MCN.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Islander
World Chat Champion



Joined: 05 Aug 2012
Karma :
PostPosted: 21:39 - 04 Dec 2020    Post subject: Reply with quote
A100man wrote:
panrider_uk wrote:
You can get jigsaw blades that only cut on the downstroke - designed for doing just this.


Tricky cutting straight lines with a jig saw - even using a guide..


Agreed. They're alright for very thin material but that's about it.

I would use a router run against a suitable straight edge. Smile
 Back to top
View user's profile Send private message You must be logged in to rate posts

A100man
World Chat Champion



Joined: 19 Aug 2013
Karma :
PostPosted: 15:01 - 09 Dec 2020    Post subject: Reply with quote
Ok so last night I did cut the door I was concerned about. First I experimented with some new Bosch down-stroke blades in my Bosch jig saw. OK ish if running with minimum pendulum and highish blade-speed..

Tried again the fine toothed Spear and Jackson predator hand saw which was better - I used that in the end at a shallow angle and got no chips on the surface on show and just a few on the inside of the door which I could touch up with white paint if needed. Finished and squared the edge with a block of wood and 'sand' paper.

So once again a sharp hand saw wins the day..

.. PS I don't have a router
____________________
Now: A100, GT250A, XJ598, FZ750

Then: Fizz, RS200, KL250, XJ550, Laverda Alpina, XJ600, FZS600
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 3 years, 131 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Dear Auntie BCF... All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.09 Sec - Server Load: 0.2 - MySQL Queries: 17 - Page Size: 80.45 Kb