FRS900 L Plate Warrior
Joined: 14 Dec 2020 Karma :
|
|
xX-Alex-Xx World Chat Champion
Joined: 12 Sep 2019 Karma :
|
|
WD Forte World Chat Champion
Joined: 17 Jun 2010 Karma :
|
Posted: 02:12 - 12 Sep 2021 Post subject: |
|
|
Its a one piece system.
They use 2x M8 cap head bolts at the exhaust port/head
If they're not seized, or rotted so much the hex key just spins
removal of the exhaust system is easy.
If they come out OK
Yours will probably have a rubber pipe from the AIS down to a
spigot at the beginning of the silencer which is easily pulled off then its just 1 bolt at the rear and the whole thing can be removed.
I usually support the silencer with say a box to help refit it
new seal and bolts is good practise.
New copy exhausts are cheap enough but the non AIS ones are even cheaper so I'd just buy cheap, blank off the AIS bollox and save money.
this non AIS one's just sixty quid
https://www.ebay.co.uk/itm/362166883945?fits=UKM_CCM%3A125%7CUKM_Make%3AYamaha%7CUKM_Model%3AYBR&hash=item5452d41669:g:yv4AAOSwAn9cgjax ____________________ bikers smell of wee |
|
ThatDippyTwat World Chat Champion
Joined: 07 Aug 2016 Karma :
|
|