Mark65 World Chat Champion
Joined: 16 May 2008 Karma :
|
Posted: 15:05 - 23 Jul 2022 Post subject: Scorpion End Can, Evotech Hanger |
|
|
Hi All,
I have a dilemma, I put my scorpion end can on stock hanger and then I saw an Evotech hanger and bought that off Ebay as they not made any more, I didn't think at the time the hanger was designed for the stock exhaust and not a Scorpion.
I'm assuming the mounting point is different, any way I have two options one is to buy two 20mm stainless stand offs and mount between the frame and hanger and that gives a good 12-15mm clearance between the swingarm ang can ( i used nuts to try this spacing or use a 12mm spacing as shown in image and have the can on the outside of the hanger.
I really like the hanger and would prefer to keep it if possible.
Any thoughts if anyone has done this?.
Thanks
Mark ____________________ 07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650 |
|
Nobby the Bastard Harley Gaydar
Joined: 16 Aug 2013 Karma :
|
|
Mark65 World Chat Champion
Joined: 16 May 2008 Karma :
|
Posted: 21:42 - 23 Jul 2022 Post subject: |
|
|
____________________ 07 Yamaha YBR125, 07 Honda CG125 , 15 CBR300R (Chocolate Crank, Deaded), 16 CB500FA, 19 Honda Forza 300, 70 Suzuki SV650 |
|