WAHHHH :( ITS RESDRICTED..........

Scooby · Scrappy Doo Joined: 26 Mar 2002 Karma :

Bah, been out for a proper run on my NSR for the first time today.....and the bastards restricted!! Crying or Very sad

How long does it take to derestrict??? I have got the printouts for the derestriction guide off nsr125.com but would rather know how long its gonna take me before I start fiddling!! lol
____________________
A big enough hammer fixes anything!

Scooby · Scrappy Doo Joined: 26 Mar 2002 Karma :

erm.......plz reply someone???

Very Happy

____________________
A big enough hammer fixes anything!

Phil.S · Nitrous Nuisance Joined: 04 Feb 2002 Karma :

About 2-3 hours for the exhaust,
upto 1 hr for the intake plate.
take your time with it M8 and make sure you have a lot of drill bits,
also a file.
____________________
Opinions are like assholes,
Everyone has got one.
(Dirty Harry)

craigT19 · Jolly Green Giant Joined: 09 Feb 2002 Karma :

phil it took you 3 to 4 hours???? what where you doing it with your feet lol
i got to the carb plate in about 25mins (take off the seat 30secs take off the tank 2 mins take out air box 5mins take out carb 10 mins plate 2 secs all back together 10 mins, including the tank you only need to undo 3 nuts and 2 screws its the hoses on the carb thats the bitch) the exhaust is a pain took me an hour because the thing kept sliding down the pipe:(
____________________
Bikes owned :- 2001 nsr125, 1999 zx6r, 2006 yzf-r1, 2009 xmax 250, 2012 yzf-r1, 2015 MT-07
Current bike : - 2016 MT-10
Crying or Very sad

BCF member pops. sadly missed Crying or Very sad

1945-2003

Phil.S · Nitrous Nuisance Joined: 04 Feb 2002 Karma :

I took my time with it what can i say.
also i had many brews and fags during the delicate operation.
as well as going to and from the hardware shop for drill bits.
Never done it before so i wanted to make sure i did it properly.
quite a pleasent experience if you take your time,no rushing or panicking,
on a Sunny Sunday morning.
I could do the lot in about an hour or two now,cause i know what i am doing.
____________________
Opinions are like assholes,
Everyone has got one.
(Dirty Harry)

Guest · Posted: 12:33 - 27 Apr 2002 Post subject:

it'd prob take me about 1.5 hours for the exhaust and about 30mins on the carb. exhaust is easier if you've no mechanical knowlege but if you're not scared of taking things apart and putting them back together the carb is VERY easy to do. you can't really go wrong.
amd as for a file, why? just get a metal grinding bit. it'll wear the drill bearings out a bit quick so make sure you use an old one! i can't imaging doing it using a file, how long would it take!

Milo · World Chat Champion Joined: 08 Feb 2002 Karma :

Doh! that was me
____________________
Shaft drives rule. Razz