Undertray Fitted

[K3zXTC]

Ok Here are some pictures of the undertraybeing fitted, not 56k Friendly! the Full cost came to around £70 inc , bracket, indis, number plate and tray.

Picture 1 : The Undertray the day it arrived from U.S.A in a box, now paperwork or fixxing instructions! HURAH!.

https://i176.photobucket.com/albums/w192/GSXRKez/step1.jpg



Picture 2 : The seatpod! hmm nothing out of the ordinary here me thinks!

https://i176.photobucket.com/albums/w192/GSXRKez/step1pod.jpg


Picture 3 : The removal of seat pod / old numberplate ( which was like 4" big!) / and removal of indi's

https://i176.photobucket.com/albums/w192/GSXRKez/step2.jpg


Picture 4 : Step 3 in the process "Let the games begin!"

https://i176.photobucket.com/albums/w192/GSXRKez/step3.jpg


Picture 5 : Still Cutting...

https://i176.photobucket.com/albums/w192/GSXRKez/step4.jpg


Picture 6 : And Still Cutting.....

https://i176.photobucket.com/albums/w192/GSXRKez/step5.jpg


Picture 7 : Still cutting bored of showing the cutting phoase now, so the white lines show what else needed to be gut!

https://i176.photobucket.com/albums/w192/GSXRKez/step6.jpg


Picture 8 : Align the tray! ( The towl helped alotdon't mock! )

https://i176.photobucket.com/albums/w192/GSXRKez/step7.jpg


Picture 9 : Align the lights ( Had to use cable ties to fix it to theframe in the end )

https://i176.photobucket.com/albums/w192/GSXRKez/step7b.jpg


Picture 10 : Replacing the seat pod

https://i176.photobucket.com/albums/w192/GSXRKez/step8.jpg



Picture 11 / 12 / 13 : Problem i came across after fitting.

https://i176.photobucket.com/albums/w192/GSXRKez/problem1.jpg

https://i176.photobucket.com/albums/w192/GSXRKez/problem1a.jpg

https://i176.photobucket.com/albums/w192/GSXRKez/problem1b.jpg


Picture 14 / 15 / 16 : The problem once fitted the new indi's / bracket and plate

https://i176.photobucket.com/albums/w192/GSXRKez/undertray12.jpg

https://i176.photobucket.com/albums/w192/GSXRKez/undertray2.jpg

https://i176.photobucket.com/albums/w192/GSXRKez/undertray16.jpg


So after alot of messing around i found that the rubber washers under the seat were much too big, probably the lad before me had lost the originals, as once checking the old mans bike his are much much smaller!. So i made some adjustments and fixed the undertray firmly to the frame!

here is the end product! And i know i needed a smaller plate!

First Picture : In this picture you can see the small cable ties holding the undertray tothe frame!

https://i176.photobucket.com/albums/w192/GSXRKez/cabletie1.jpg

Second Picture : Finished!

https://i176.photobucket.com/albums/w192/GSXRKez/finished1.jpg

Third Picture : another angle

https://i176.photobucket.com/albums/w192/GSXRKez/finished2.jpg


Final Picture : My baby!

https://i176.photobucket.com/albums/w192/GSXRKez/finished.jpg

[syris]

That undertray is cool, suits the bike really well.

I've never fitted one before, looks like there's alot of messing about involved?

[cokker]

Looks great mate well done, good idea with the towel!

On the second to last pic: What are the LED looking things just above the number plate?
____________________
No longer have a bike due to a DVLA/Court royal f**k up.

[veeeffarr]

Jesus mate that bike is fricking lovely.

Can't wait to cramp your style with mine on the piper runs

[jon_nsr]

very nice mate
____________________
1999 GSXR750

[K3zXTC]

The L.E.D things are indicators, but its illegal to use them over here too close togeather says the DVLA! bah . Thanks Toby can't wait for a ride to the Scotchie.


Yer there is alot of messing around. mien was a tight fit like, but my old mans was alot easier.

[cokker]

[K3zXTC]

I was thinking about doing that exact idea, but i am unsure at the moment

[chalky143]

nice undertray looks good!! awsome bike
____________________
Current bike :: sv650 minitwin race bike
Previous bikes::cbr600 steelie race bike, 1989 Honda vfr750f, 2013 Honda fireblade, 2013 Ducati multistrata 1200s, 2012 Triumph street triple R, 1999 yamaha r6, vfr 800, ducati 600ss, vfr 400x2, ntv 650, bandit 600, cagiva mito 125, aprilia rs 50, honda c90x2, honda hornet 600x2, cbr 600, aprilia rx50, suzuki katana
My bike pics: https://www.bikepics.com/members/chalky143/

[Gazdaman]

I would have spent the money on a new can.

Looks really good, I actually really like the non colour-matching aswell.

Gaz

[K3zXTC]

New can this week , also screen.

just found out as long as i have the mini indi's running i can also have the LED ones! so sorting that this week!

[Shaun]

I'd ditch the indicators and use the LED ones, I can't really see the police pulling out a tape measure and checking the distance between them, just keep the standard indicators for MOT time.

[Fahd]

That looks brilliant in my opinion, much better than the original looked! well done...

[Method]

Looks good but that plate looks like its goin to hit the rear tyre when you go over a speed bump or something... The angle looks too steep downwards to me?

Could just be my imagination but looks like you need to either get a smaller plate like you mentioned, or get one of the adjustable Rsends and tilt the plate upwards a bit...
____________________
CBT Aug '03 ... Gilera GSM 50 ... Honda NSR 125 Aug '04 ...
Full Test Dec 04... Suzuki GS500 Jan 05... Suzuki SV650 Mar 07... Gixxer 6 K5 May 08... Oh and my 'Rado
My Bikepics.com - No Brakes, No Gears... No Fear.

[mod661]

Just curious:

Is your numberplate the 'proper' size?

If not what is it?

I want something that's nearrrllyyy legal, but a little smaller than what is, so it makes the back of my R6 tidier.

Beautiful bike you've got there, really good job fitting it.
____________________
Nick - 56 R6 in Red/White

[Mr.Everready]

Take the indicators off and get a smaller plate. I've got an integrated rear light and had no problems at MOT time. The tester was only worried about the flash rate.
____________________
the undemocratically unelected mod of the Scottish section

[quacker_boy]

You are the ultimate in tartiness, having GSXR on your brake lights

Undertray looks awesome mate, what can you opted for?
____________________
wizzzard wrote: Imagine God just stopping by, tidying your front room up and then quietly letting himself out again. Statisticly more likely to happen than Korn being on here.

[K3zXTC]

Well, i do need a smaller plate as at the moment it's legal size, i do agree it needs tilting a wee bit ,

Still looking for a Can tried eBay but keep getting out bidded. looking at getting a Scorpion can, Just got a blue screen and it looks really nice.

Also its not the MOT tester i'm worried about its giving the fuzz another reason to pull me over.

[matt_uk]

the gsxr looks great in blue/silver
____________________
- - - BIKE - - - Passed CBT : 21/07/06 - - - Currently : Riding a 2001 Aprilia rs125 (SOLD)
- - - CAR - - - Passed Theory 20/07/06 - - - Lessons, Test on 15th Jan 08... Passed 2 minors

[Sharpy]

[brianmcewan.co.uk]

That looks smart mate. Definately a proper tart

I think the new can will set it off
____________________
Kawasaki Z1000 '05
Honda Fireblade 954 '03

[The Tot]

For smaller plate,

I'd definately suggest Roryplates on ebay. 11 quid and it's all there, 6x4's to legal size, any font, with border and GSXR graphics thrown in. Next day delivery is free of course.

I've used him a few times, and they're pretty good as my pic suggests

https://photos-871.ak.facebook.com/ip002/v72/10/100/500990711/n500990711_38871_7493.jpg
____________________
The Tot 2007 Yamaha R1 4C8 2002 Yamaha FZS1000 Fazer &
www.youtube.com/Titot182 for your bike gear reviews and pop punk covers
Earl Of Easycore Pop Punk Will Never Die!

[K3zXTC]

I get my plate done for around £8 from St.Helens Any size, border text at the bottom and for an extra £1 i can get GSXR ghosted into the background , am just lazy, I got my new can so pictures will be up later, i will also slant the numberplate a little.