bandit tail piece

[yankeedoodle]

has anyone put a new (2000 onwards) tailpiece on the older bandit? Can it be done? How easy is it ect

Cheers

[Kara]

What bit are we talking about? The fairing cowling? the bit with the light in the back? The sub frame?

In my experience, they are all pretty straight forward.
____________________
NC30 + Bandit 6
www.eabikers.co.uk

[yankeedoodle]

this bit:

[Kara]

a)Take seat off
b)take bolts out of grab rails
c)take out all visable bolts holding fairing on.
d)unplug rear light
e)Pop out the bits at the front by pulling them out gently.
f) gently slide entire fairing as one piece backwards.

To fit the new bit, if it's for abandit just do the reverse, if it's for another bike, make it fit!
____________________
NC30 + Bandit 6
www.eabikers.co.uk

[Gazdaman]

It'd be very very surprised if it fits without a ton of brackets and sub frame bodging.

Gaz

[planet rider]

yankeedoodle that should be a straight fit with all the pannels taken off and the seat braket. Iam selling my one of those it looks like a r1 unatec unit witch needs no mods to the sub frame.

daz
____________________
Xj 900

[funmonkee]

You can make anything fit if you really want it too
____________________
**** Don't ride faster than your angel can fly Get this Free Space
The democratically elected Mod of the Scottish Section - The Peoples Choice[b]

[phk6]

[hmmmnz]

thats what they made saws for
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Gazdaman]