Electrical indicator problem

[jim-cr 250]

hi,i have just bought my self a yamaha jog rr,and im having trouble with the indicators,there not working ,i have tested the bulbs, switch,there is 13volts live coming into the switch,checked left and right wiring out of the switch to the indicators and only showing 3 volts coming out and when the switch is turned to left or right the volts drop to 3 volts,turn it off again and it goes to 13.I have also put a live wire directly to the wires to the left and right indicators on the switch and both front and rear indicators bulbs light up.

can anyone shed some light onto what the problem is?

Thanks

[hmmmnz]

turn signal relay
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Jamie S]

Yep had this prob with my Cb750 its the indy relay , test it by putting a screwdriver across the terminals on it and see if they come on ( they won't flash tho , if they come on and don't flash the the relay is goosed

[hmmmnz]

heres a manual
jog manual
and heres a wiring diagram
https://images6.theimagehosting.com/albums/25062/yamaha.jog.02.th.JPG
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[jim-cr 250]

[hmmmnz]

ok that should be it sorted
try the link again
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches