ZIM & KORN

[MIKEY B]

https://folk.uio.no/joakimt/vtr/mwe.jpg

Track Day Tool!!!!

You guys done any Mods yet?

Blueflames yet Zim?

Mike.
____________________
GSXR 1000 K3 "Silver Bullet"
Yamaha XS 650 Hardtail bobber

[Robson]

hmm the word weapon springs to mind..............i'd have 1
____________________
Cheers

Paul (Robson)

[MIKEY B]

Wouldnt mind one of these either!!!

https://www.streetfighters.nl/spec/show.jpg


Havent got a clue what it is though!!!

Mike.
____________________
GSXR 1000 K3 "Silver Bullet"
Yamaha XS 650 Hardtail bobber

[bikerboy1]

ummmm they both look evil!!!!
____________________
when you see something like a bullet going past you, don't worry it's only me!!!!

[G]

Well... it's got a Spondon frame I'd presume... with bits of a lot of other bikes bolted on.

[drunkstudent]

and what looks like a triumph rear wheel and swing arm

[Zimma]

looks to me like a suzi engine? not sure of the size..
____________________
-Zimma

[Robby]

its a streetfighter, so its the gixxer 1100 engine. looks like a modded sv650 frame, could be a spondon tho.

[Zimma]

i woulda guessed at the gsx 1.1 engine, as a lot off SF's use it.. apparantly its quite tunable and doesnt go pop with lotsa mods?
____________________
-Zimma

[G]

It has 'spondon' written on the side, and looks like one, so I'm guesing it is one

[Robby]

ok so it probly is. just looks like a modded sv650 frame from streetfighters a few months back.

[minesweeper]

Possibly a ducati rear wheel, wouldnt like his insurance quote

Matt

[Keith]

Hi

Not sure about the rear wheel. Could be 916, but the spokes look straighter than the Ducati ones

The engine isnt a GSXR1100 one. For a start it has a radiator which means it is liquid cooled (and the GSXR11 engine is oil / air cooled).

Also the engine looks like it has the cam chain on the end of the crank (GSRR11 has the cam chain up the middle of the engine), and the clutch cover looks like the style that Kawasaki use.

Would be nice to know though

All the best

Keith

[Robby]

i'm sure some gixxers have external oil coolers, the new sachs bikes have oil coolers as standard and a lot of the ones in streetfighters have external oil coolers.

[G]

I believe the last model of GSXR1100 were watercooled (WP model?)... But, yea it doesn't look like a GSXR1100 engine, however my general knowledge of them is probably from Streetfighters magazine

[Kickstart]

[kev]

its a spondon frame and swinging arm with a blade engine
____________________
20:02:36 Jammy-R6: any holes a goal
20:02:48 kev: even if its a hairy mans arse
20:02:56 Jammy-R6: hell yes

[kev]

just had another look the wheels are dymags
____________________
20:02:36 Jammy-R6: any holes a goal
20:02:48 kev: even if its a hairy mans arse
20:02:56 Jammy-R6: hell yes

[TiN]

It does look like a fancy SF'd 'Blade...the rear seat unit looks like a blade...
____________________
TiN
dotgems.net

[MIKEY B]

Spondon, gsxr1100. r6 back end zxr 750 forks and wheels spondon fully adjustable yokes billet calipers ohlins shock monster frame k reg banana swing arm.

Well it looks pretty much the same, apart from the wheels.

https://bike-exchange.com/GSXR%20Spondon.jpg
____________________
GSXR 1000 K3 "Silver Bullet"
Yamaha XS 650 Hardtail bobber

[G]

Does look like a different engine... and that looks a more likley candidate for an oil-cooling radiator (much smaller pipe.. going to the bottom of the engine - Also seems to have cooling fins on the engine)

I think the frame is an older model to the first pic as well.

[Anthony]

Look at this busa, it looks well nice and i bet it sounds phat