I am a jammy git when it comes to ebay.......

[Fisty]

..... look what I picked up for less than the cost of a few beers in the pub!


It was advertised as a bike breaking, went to look at it and it was plastered in trick bits. Got the shock, a set of new tyres, carbon front mudguard and a set of gsxr100 k1 calipers very cheaply. I am a happy bunny!
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[Tarmacsurfer]

K1 calipers cost a fortune, got some for the ZZR recently.

Sounds like a nice haul. Project bike or just sorting a scruffy K1?
____________________
I'm immortal. Well, so far.

[Fisty]

Its all for a zxr 400 gsxr calipers pretty much bolt straight on.
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[GeorgeCBR]

So, how much did you pay then...? You could mean a few £50 pints... or a few £2.50 pints
____________________
|| Ride - Kawasaki Z1000 & Honda Bali 50 || Theory - Passed || Practical - Passed ||

Previous || Suzuki Bandit 600N - Honda CBR 125 - Gilera Runner 50

[quacker_boy]

[yzf750r]

the GSXR1000 calipers go onto a ZXR750, but dont know if they go onto a 400 as easily? Go on, how much?
Im guessing £200 would be a bargain at this time of year!
____________________
04 zx10r with mods - 187.4bhp at the wheel! :o

[Fisty]

all you need to do is drill and tap them to the correct size, the hole centers are allready 65mm apart. Got the whole lot for £160

(the few pints relates to the shock, he only wanted £35 for it)
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[yzf750r]

Nice one mate!



Steal of the century I say!

I'll buy the shocker, £40?
____________________
04 zx10r with mods - 187.4bhp at the wheel! :o

[Fawbish]

tyres in good nick i take it?


quite the steal!
____________________
"Oh....it looks like Average Joe's is forfeiting the match!" - "Yeah, its a risky strategy but lets see if it pays off for 'em Cotton."

[Tarmacsurfer]

That is a bargain. I paid more than that for the calipers alone.

I wouldn't drill and tap them, just get a set of 8mm sleeved spacers made up. Shouldn't be too hard to measure up with a micrometer, that way you can center them precisely rather than have them likely sitting a few mil out on the disc.

[EddyJones]

What were the fairings like mr fisty? if they were decent would you mind pm'ing me the ebay ad?

Hope it all fits on alrite! are you on zxrworld?

[Fisty]

Fairings were beaten up race plastics im afraid!
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret