wheel refurbishment

[TUBZ69]

im guna be chuckin an MOT on the c90 sittin in my garage to bumble about on whislt im rebuildin the zx6r b4 the summer, however i picked up a 2nd hand rear wheel cos the last one was knackered, the one ive recieved is a bit rusty so im thinkin of removing the suface rust, cleanin it up an sprayin it black (sum sort of anti corrosion paint or sumthin.... )
what products can i use to take the rust off, an what sort of spray paint do i need?
thanx
T
____________________
those who risk nothing, become nothing, achieve nothing....
c90 rvf 400, vfr 400, gpz 500, Gsxr 750, R1, Zx6r....

[Syx]

Your local Halfrauds will sell rust removal acids, I used "Swarfega Metal Cleaner & Restorer" which is a phosphoric acid based solution. Apply some of that with a bit of elbow grease, then some wet & dry to finish up.

As for the paint, I've no idea on that one.

[Noxious89123]

WD40 + Brillo pad.
____________________
'06 Honda CBR125RW-6 ~ '00 Honda CBR600F-Y ~ '07 Honda CBR600RR-7 ~ Bikeless
'53 Ford Ka 1.3 ~ '03 Vauxhall Astra SRi 1.8 ~ '52 Vauxhall Astra SRi 2.2 ~ '53 Vauxhall Astra GSi

[craigs23]

A powdercoaters.