gargantual item of insane interest... gsxr owners...

[MaybeGuy]

heres the plan... ive got a srad, but im not too keen on the clocks, theyre foreign anyways... (km)

now, is the clock loom any different between the srads and the K series gixers? as i wouldnt mind some K1 upwards clocks on there, i like digital speedos

cheers queers xxx
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[hmmmnz]

yep quite different
the speedo sensor wires are different colour,
infact most of them are different colours,
i dare say you could get it to work... well maybe
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[hmmmnz]

or you could buy some koso clocks and do the same thing with minimal effort
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[MaybeGuy]

those kyoifdhskhg clocks are bloody sexful! thanks for that.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[MaybeGuy]

what are they like for quality and longlivity? i dont want to fork out £130 on crap.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[hmmmnz]

i have a koso unit on me zxr, youve seen it, i can't fault it at all.
the best thing about mine for me was that it has a water temp.
that one also has oil temp, plus rev light, 1/4 mile timer, ect ect.
they might not look as good as the acewell units, but they have far more funcions. i dont think you could get a better set for the money!!
i dont think you could buy a set of stock clocks for the same money
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[The Tot]

Are they made in KO SO VO???

Logan, how did u get around in MOT when verifying the mileage?
____________________
The Tot 2019 Z1000SX - 2007 R1
Never argue with autism

[hmmmnz]

you dont need to verify mileage.
they didnt put anything in the milage part,
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Ben.]

hmm anyone got any picys of them clocks on their bikes?
____________________
follow my racing season
Race bike - R6
Road bike - sv650

[MaybeGuy]

youtube RX1N, most of them are on scooters, but theres one on some sort of 125 and a few more.

they do look a bit chavvy and too bright, but a higher wattage and its sorted.
still looks sexful.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[Whosthedaddy]

[hmmmnz]

i have a slightly plainer ones on my zxr
https://i58.photobucket.com/albums/g257/hmmmnz/DSCF0472Small.jpg
they have a digital readout for revs, but i just can't stand that. so i have a little tacho on the side
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches