boyesen reeds?

[salty21]

what do you guys wreckon to these

https://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&rd=1&item=120210744901&ssPageName=STRK:MEWA:IT&ih=002

do you think they would work well with a nsr?
____________________
04 NSR 125(sold) ---- 03 CBR 600rr(sold) ----90 pan euro ST1100 '' ----02 CG 125
94 CB400 Super Four ---- 2000 VTR SP1 (sold) ---- 08 ninja p8f(sold, meh) ----05 CBR600rr

[Shaane]

Looks good but do you think it would work yourself?

NSR 125?

If so would it be wise? I'm no bike genius but wouldn't it effect the bike in any way if you fitted these?
____________________
EMRA Roadstock #92 - Paperwork Permitted.
Previous: 1992 DT125R
Current: ~ 2005 ZX6R C1H

[MaybeGuy]

sorry but with an ad like that, buying them would make you a complete 'tard...

the pic in the ad isnt even an NSR, and with a quote like 'the pictures speak for themselves'...
avoid this rip off bastard.

you can get reeds and a reed block for the price hes asking for just the reeds.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[mrbluesbox]

i bought some boyosen reeds for my derbi gpr.
they do make a difference to throttle response and low end power (i.e. less than 5k rpm), and are probably worth splashing out on if ya gonna have the 125 for a while.
i got a pod filter too and the result was pretty good - just dont expect miracles.
dead easy to fit - just remove your carb and manifold, then the reed block, unscrew the old ones and stick the new ones in - took about an hours or so.
you will almost certainly need to rejet your carb and play with the air idle settings and thats a bit trickier.
I went from a 190 to a 230 main jet and still dont think that was totally right - the instructions say you may need to reduce main jet size but i added the filter too and increasing the jet size was the shops reccomendations.
ill get round to finishing it someday when i get time and money.
____________________
I seem to have misplaced my pants...................

[Finglonga]

They used to be the best reeds you could get, not sure of the quality of them now?
____________________
Andy Sez....
F.Y.Y.F.F.

[alains]

they are good for dirty bikes not for sport bikes and they are very expensives . look here https://cgi.ebay.de/Carbon-Membrane-Tuning-Honda-NSR125-NSR-125-CRM-CR-036_W0QQitemZ110212788909QQihZ001QQcategoryZ25632QQcmdZViewItem
____________________
the worst day fishing is better than the best day working

[Vincent]

Not sure if they have NSRs over there, but check out eBay USA, I got a complete set for my RD350 for £15 inc post

[joseph.griffin]

I bought some for my NSR125 after following the link from alains.

They have made a difference but it's difficult to say how much.

Dead easy to fit.

Joe
____________________
1999 Honda NSR125RX F Black and Silver (but with loads of scratches)
13/04/08 - Now a 1991 Honda VFR400R-M NC30 Black and Grey (Not road legal yet)

[salty21]

ok, cheers for the input guys will follow alains link as advised
____________________
04 NSR 125(sold) ---- 03 CBR 600rr(sold) ----90 pan euro ST1100 '' ----02 CG 125
94 CB400 Super Four ---- 2000 VTR SP1 (sold) ---- 08 ninja p8f(sold, meh) ----05 CBR600rr