Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Check out this chart for the Yoshi RS5 on a CBR600RR

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

crphillips
Borekit Bruiser



Joined: 17 Feb 2008
Karma :
PostPosted: 21:51 - 16 Mar 2008    Post subject: Check out this chart for the Yoshi RS5 on a CBR600RR Reply with quote
Below is a link for the Yoshimura website. It shows a power/torque chart for the CBR600RR with the standard can and then with the RS5 can.


There is a huge power drop around the 2,300rpm point but the main thing i can't understand is that the bike seems only to be tested upto 7,800rpm......the engine revs to 15,500rpm......unless i'm understanding it incorrectly.

https://www.yoshimura-rd.com/ps-3309-1284-rs-5-stainlesstitanium-full-system.aspx

It's power can't peak at 7,000rpm otherwise all the racers would change gear before 10,000rpm.
____________________
CBR600RR8 Hannspree Colours, beautiful!
 Back to top
View user's profile Send private message You must be logged in to rate posts

thegubner
World Chat Champion



Joined: 25 Mar 2007
Karma :
PostPosted: 22:21 - 16 Mar 2008    Post subject: Reply with quote
It'll be a government conspiracy to try and make us think cans that aren't standard are shit, and we wont use them. Rolling Eyes
 Back to top
View user's profile Send private message You must be logged in to rate posts

D O G
World Chat Champion



Joined: 18 Dec 2006
Karma :
PostPosted: 22:54 - 16 Mar 2008    Post subject: Reply with quote
I would suggest that the x-axis scale is incorrect, and that the power drop that low down matters not a jot since the bike will never be down there anyway.

For a prestigious power graph after a replacement system, see this for the akra pipe for the BMW R1200S.

Power drop off at 5k sir? You'll be needing one of these!

https://www.akrapovic.com/typo3conf/ext/user_products/mod1/uploads/documents/9bcbaf6b54c1e81722d4a91024959064.jpg
 Back to top
View user's profile Send private message You must be logged in to rate posts

crphillips
Borekit Bruiser



Joined: 17 Feb 2008
Karma :
PostPosted: 22:57 - 16 Mar 2008    Post subject: Reply with quote
bloody hell......there's around 25bhp difference at 5500rpm!
____________________
CBR600RR8 Hannspree Colours, beautiful!
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :
PostPosted: 01:39 - 17 Mar 2008    Post subject: Reply with quote
crphillips wrote:
bloody hell......there's around 25bhp difference at 5500rpm!


What are you looking at there is less than 10 Laughing
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

craigs23
Mr Muscle



Joined: 08 Jun 2005
Karma :
PostPosted: 06:42 - 17 Mar 2008    Post subject: Reply with quote
Wonder what the differences are at part throttle openings.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

D O G
World Chat Champion



Joined: 18 Dec 2006
Karma :
PostPosted: 09:23 - 17 Mar 2008    Post subject: Reply with quote
chris-red wrote:
crphillips wrote:
bloody hell......there's around 25bhp difference at 5500rpm!


What are you looking at there is less than 10 Laughing


Agreed, but look at the torque curve!

Yes, I know that is also only around 10lb ft, but the difference in profile is simply remarkable.

It's like a fooking table between 6250 and 7750 rpm.

Very nice.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Fawbish
World Chat Champion



Joined: 27 Jan 2006
Karma :
PostPosted: 13:55 - 17 Mar 2008    Post subject: Reply with quote
chris-red wrote:
crphillips wrote:
bloody hell......there's around 25bhp difference at 5500rpm!


What are you looking at there is less than 10 Laughing



I was just gonna say Laughing


Its like 5hp at 5500.


Still good though, its almost the same constant increase at 5000rpm to 7000rpm. Impressive stuff Thumbs Up
____________________
"Oh....it looks like Average Joe's is forfeiting the match!" - "Yeah, its a risky strategy but lets see if it pays off for 'em Cotton."
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

crphillips
Borekit Bruiser



Joined: 17 Feb 2008
Karma :
PostPosted: 21:15 - 17 Mar 2008    Post subject: Reply with quote
yeah sorry....was looking at the torque curve....doh!
____________________
CBR600RR8 Hannspree Colours, beautiful!
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :
PostPosted: 21:20 - 17 Mar 2008    Post subject: Reply with quote
Damofo D.O.G. wrote:
chris-red wrote:


What are you looking at there is less than 10 Laughing


Agreed, but look at the torque curve!

Yes, I know that is also only around 10lb ft, but the difference in profile is simply remarkable.

It's like a fooking table between 6250 and 7750 rpm.

Very nice.


I wasn't arguing that the graph isn't impressive, just that there is no where near a 25bhp gain...
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 18 years, 245 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.05 Sec - Server Load: 0.27 - MySQL Queries: 14 - Page Size: 66.21 Kb