Testing new scrape bar on the cbr stunter...

[Sparks!]

Put a "round" 12 bar on my bike now.. it's just a scrape bar to protect the tail (yeah I know the tail on mine is cut - but the new f4i im building is fully faired wtih stock fairings so it will look better on that!)


https://www.sparksfreestyle.co.uk/gallery/albums/userpics/10001/spark2test.jpg
https://www.sparksfreestyle.co.uk/gallery/albums/userpics/10001/spark3test.jpg
https://www.sparksfreestyle.co.uk/gallery/albums/userpics/10001/spark4test.jpg


I did scrape the bar in spreader (sat on tankk with legs out) but the pics are on a different camera, not sure if he got a decent scrape pic but won't know till I see the pics.

and a random foot on cage circle pic


https://www.sparksfreestyle.co.uk/gallery/albums/userpics/10001/spark1test.jpg

and yeah, I know, I need some longer trousers
____________________
Current Toys: 06 Yamaha WR250F | Nissan 350Z GT | Tech 4 Homes

[Itchy]

What is it with stunters and CBR600F4/F4i , , availability of parts or something?.

Not seen a stunter R6 , Zx6R GSXR etc , for a while...
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[binge]

Fuel injection is better so ive been told.
CBR is made by Honda. Which means a solid engine.

Also parts are highly available. And not at bad prices either.

[Sparks!]

[McGee]

I shall steal your skills while you sleep, and no longer be a squid like Binge.
____________________
◙◙► K6 GSXR 600 ◄◙◙◙◙► K5 GSXR 1000 ◄◙◙◙◙► K5 GSXR 600 ◄◙◙◙◙► 96 RF600r ◄◙◙
◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►◄◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙►
Its pronounced Jixxer!

[JakeyR]

Facking ace, well jealous.
____________________
Banned till April 2011.

[colin1]

what psi do you run on those sort of low speed wheelies ?

how much do those engine bars cost ?
____________________
colin1 is officially faster than god

[binge]

PSI is anything you feel comfortable with.

One of the stunters I ride with occasionally runs 15/20psi. But he doesn't carry a pump or anything. And obviously has to ride it on the road to wherever hes going to stunt too. So it cant be "too" flat.

[Sparks!]

Thanks for the comments guys

Colin,

In those pics I don't know what the psi was.. I was starting at about 20 and it let itself down quite quick as there was a problem with the valve! rather annoying!!! It looks quite low in the pics, lower than I'd normally have.

I prefer to run 18psi and I now have a new tyre that doesn't leak

I'd reccomend learning on about 10-15psi. when you get into circles a slightly higher PSI like 18-25 ish makes it better (but harder... but its better trust me )
____________________
Current Toys: 06 Yamaha WR250F | Nissan 350Z GT | Tech 4 Homes

[binge]

Craig I do admire your skill!

I had another little blast on Keith's Fireblade the other night. But I was out in the Car, so I had shorts on, And a hoodie. And Keith's bash hat!

I suppose its what your use to, but I couldn't for the life of me clutch it up comfortably. It was soooo twitchy! Doesn't help that he is running a 1 finger clutch lever!!!
Also its a bit of a lump is that fireblade. Slightly bigger than my NC29 anyway.

[Ciar?n]

[binge]

[Shaane]

I will probably make myself look a idiot.. But why is the back tire so de-inflated ? (Sorry, Don't even know if that is a word)
____________________
EMRA Roadstock #92 - Paperwork Permitted.
Previous: 1992 DT125R
Current: ~ 2005 ZX6R C1H

[Sparks!]

[Shaane]

Thanks for fast reply mate. How long you been stunting for?
____________________
EMRA Roadstock #92 - Paperwork Permitted.
Previous: 1992 DT125R
Current: ~ 2005 ZX6R C1H

[Sparks!]

[Ciar?n]

[Sparks!]