Brake caliper PCD, 65mm Required.

[Fisty]

Does anyone know which bikes, model and year have a 65mm pcd (hole centres) on their brake caliper mounting holes.?

Im after a replacement for the zx9r as the ones that are fitted are utter toss.

Cheers , Tom
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[hmmmnz]

any of the zxr750's and the zx7r bikes,
i take it yours is the b model??
the busa also uses the same calipers,
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Fisty]

Tried that, they are 90mm pcd. cheers anyway.

Mines a B1 model.
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[iooi]

Be carefull, as while they may have the same 65m/m pcd. They may have diffrent pad offsets and run on diffrent dia/thickness disks
____________________
Just because my bike was A DIVVY, does not mean i am......

[hmmmnz]

im pritty sure the zxr750 calipers are exactly the same as the zx9r b model bikes,
and both 6 pot and 4 pots are interchangable.
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[Fisty]

They aint, B1-B2 have 65mm pcd, B1-B4 have 90mm pcd ( same as zx7r later zx97 hayabusa tl etc etc)

I knows this as Ive bought a set of zx7r calipers and they dont fit!
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret