Transmission (Scooter)

[EnergyInducti...]

I've fitted my Polini evo variator... But I need to get in the clutch to change my Contrast spring, my clutch springs and my drive belt...
I've got a Boa Constrictor strap that works like an oil filter strap to hold the clutch bell, So I SHOULD be able to get that off with ease...
But when it comes to the actual CLUTCH and PULLEYS, Will I need any special tools to take the bolt off? Or can I just get my friend to stand on it whilst I undo the bolt with a set of adjustable pliers?
____________________
Riding: Yamaha RXS100
Aiming for : RD350 + Test
Dream bike: Suzi RG500 Gamma

[joop200789]

i use a proper single hex socket the right size,the adjustable will probably just round it off as the on really tight,
thats if you can get the boa to hold it tight enough,
on mi mates we used a air gun dint need any holding tool ask around see if anyone's got that they'll let you use
only special tool's i can think of would be a proper holding tool

[ms51ves3]

I used a boa constrictor on the variator of my CW50 without problems.

Get a 6 sided socket and (with the boa constrictor) it should come off with ease.

[EnergyInducti...]