A question for all you Ped Boys!

[binge]

Right, Im just testing the water here. Ive always fancied myself a Stupidly fast moped. Ok, I had a tuned to the Tits 70cc Speedfight which topped 70mph back in the day. But I fancy a 172. Somthing to stunt on and KD on aswell as the CBR.


my question is, Will a 2t 125 Gillera rear end fit into a Gillera ICE frame?

Housing the Rad is child's play, I can do all that. I just want to know if the engine will physically fit.

[Willenium]

I'm sure you can modify the frame to accommodate it.

[binge]

[stinkwheel]

Why not go the whole hog and build a Yambretta 350 YPVS? It's a well documented conversion and the only externally obvious difference is the twin exhaust.

60bhp lambretta, ultimate street sleeper?
https://www.scootculture.org/e2002/e2002i/npton02cs/2002-07-27-npton-139-cs-yambretta.JPG
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[binge]

Its pretty damn cool Stink, but probably beyond my technical capabilities to undertake a project like that. I want something I can chuck a 125 2t engine into, 172cc MHR kit and a fair bit of tuning will see 20bhp. And Not upset the handling of the scoot.

[SM.Morgan]

it will fit after you grind/cut away 2-5mm from the engine mounts, you wanna check out www.scootershack.co.uk look for minorconfusion he knows shed loads of facts

[madsamsamsam]

my old runner 125 got 2 82 with no tuning everything as standard after 12000m, im recon with gear kit, piston bored and tuned and race exorst it could get 2 100 no probs.....just never could b botherd 2 spend the time and munny wen the rodes round me were 2 bendy 4 lots of speed.

[adamck]

why not a 180 runner or dragster with the 220 kit on it?
fast enough
____________________
<insert><something><useful>Here</useful></something></insert>

[Robby]

[chillpill]

id much prefer too tune a 70 , 172's loose the purity off the small engine thing , whack a 70cc polini evo on it , long stroke crank , yasuni c21 and 30mm carb and youll be laughing

but yeah the engine will fit with hardly any effort , new loom will be needed of course with cdi , also youd have to reweld the rear shock mounts on the ice frame to fit the longer 125 shock , its been done loads of times before. is there a mhr 172 kit out now or is it just the malossi one your talking about ?

[ms51ves3]

Considering this thread is nearly 2 years old and was made on the day I joined, I doubt binge still wants to put a 125cc engine in a Gilera Ice

[chillpill]

didnt notice that , i guess they call you columbo for a reason