R6 LED indicators.......HELP

[jonboy1081]

Hi Guys

I bought myself an R6 last week that had LED rear indicators (fronts are OE), the problem is they flash too fast, saying that the dealer put it through an MOT and it passed like this, Ive now fitted some to the front, ive been looking through the demon tweeks catalog and they do relays to slow them down but wot do i get?, they do 2 pin, 3 pin and wot they call a "flash it" with a plug on the end, where do they go?, any help would be great please, all im thinking is if the plod are behind me am i going to keep been pulled over and told there too fast or ive got a bulb out.

All the best
Jon.

[nowhere.elysium]

Most places that sell them will have them listed according to the model and year of bike that you want to fit it to. What year R6 is it?
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project

[jonboy1081]

Hi,

Its and old shape but 06 pate.

Jon.

[st3v3]

With generic parts you can spend the couple quid trying it but in most cases I'd leave it be, if it went through an mot and isn't flashing 20 times a second then it should be fairly ok.
____________________
Roger wrote: Women don't get damp for clingy puppies. Get some better happy pills, hit the gym & buy a medallion the size of a dinner plate. Job done

[nowhere.elysium]

if you're really worked up about it, look at one of these. You could try looking at the relay that's currently on there, and just matching the number of pins to a similar one.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project