NSR125 Steering...Please Help!

[sid99]

Hi,

I had an accident recently and dropped the bike now the sterring and/or the front wheel is out of whack.

I have tried loosening the two nuts that are about half way between the bars and the wheel on either fork, then hold the front wheel in place and twist the handle bars in much the same way as a bicycle. But, they refuse to budge.

Am I doing this correctly or am I missing something??

Any help would be extremely helpful.

Many Thanks,

sid

[Ropehead]

u might of un-alligned the fork legs 2 set them back up you will need to get it on a jig.

[Kickstart]

Hi

To sort this out slacken off all the bolts except the ones on the bottom yoke. IE, the bolt near the front wheel spindle , and also the front wheel spindle slightly, the bolts clamping the clip ons to the forks and the bolts clamping the top yoke onto the forks. The hold the front brake on and bounce the front suspension up and down a fair amount. The do all the bolts up again.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing