speedfight 2 50cc Reed block

[kendonn]

Does anyone know how to remove the reedblock as it seems that one of the bolts is just a pointed metal stud.

Cheers
____________________
speedfights

[Wilson123]

Is it your 'stud' that is broken or are they supposed to be like that? If so, you'll probably find the right socket in a standard set
____________________
Doug97 wrote: Fuck you, what they did was awesome. You just wish you had the balls to be like them, instead of being constantly afraid that there's a rule somewhere out there you might be breaking.

[kendonn]

There are three nut and a strange pointed stud. I would like to know how to remove this to access the reeds.
Thanks
____________________
speedfights

[Jamie S]

That is a tamperproof security bolt, made to snap off when it reaches a certain torque when new, this then leaves what you have left, they do it to stop people messing around with different reeds ect, and de restricting bikes.
The best method of removal is to use a center punch and a hammer, and knock it round, placing the punch just off to one edge slightly and on the sharpest angle to the bolt head as you can get, you must know what you are doing to be able to do this though.
Another way (if there is room) is to grip the remaining bolt head with a pair of mole grips and turn it anti clockwise to undo it.
Jamie.

[kendonn]

Diamond Geezer Jamie. I think I'll leave it. I have put a 70cc kit and a 110 dell' orto carb on.

Thanks again
____________________
speedfights