Wheel fitments

[mistergixer]

I want to replace the 17" Wolfrace multi-shits on my MK2 MR2, i've seen a set of 16" wheels from a Nissan S14a which look like they'll do the job nicely.
Wheels are p.c.d of 5x114.3 and offset of 35-45, which match the MR2, however, the bore size is listed as 66.1, whereas the MR2 is 60.1
Any ideas as to whether this will pose a significant problem?
____________________
Space Monkey #7
Don Eladio is dead. His capos are dead. You have no one left to fight for. Fill your pockets and leave in peace. Or fight me and die!
Mistergixer's videos on YouTube

[Phoenix]

You can can get spigot rings that will allow the wheels to fit because the bore is bigger than the original, it may be a myth but people say it's not a great idea, people say don't do it as there's similar issues with my car as nothing else fits it except old Jag wheels and nobody would want to put them on a car. Although people's opinion of what is safe and what isn't varies, my bolt pattern is 5 x 120.7 but most people say a BMW 5x120 will fit just fine with no modification