ZXR400 UK '94 - Needs attention

[Fadel]

British model ZXR400
1994 L reg
18k miles
Has MOT but would have to check when it runs out, believe it's until around March next year.
Scorpion stubby exhaust with removeable baffle(will need to cut baffle to get it to fit in )
Came as a project to me, in lots of boxes.
Powder coated and painted loads of bits, frame, wheels subframe, panels, shock etc etc absolutely loads of bits!
Replaced alot of parts, Headgasket, Cam chain, plugs, filters, C+S, tyres (Pirelli diablos which have done 12 laps round donnington) brake pads, bearings etc etc again too much to remember off the top of my head lol
Take a look at the pictures but it does need a big clean as it's been sat in my garage and struggling for time lately so quickly got some pictures.

Bad bits:
Dropped an inlet valve shortly after getting it running, knew the valve clearances needed doing but assumed it would be ok for a short length of time while i sorted a few other little bits (you know how projects are, have to start up now and then etc)
It got dropped which has scuffed the N/S panel which I just quickly touched in but would need painting again ideally, the O/S panel has a scratch along the bottom which will polish out it's not deep at all but tbh cant really see it and again just never got round to doing it.
The back panels and the small panel infront of the tank aren't too great painted (orange peel) but the others are fine
Pillion Seat has a couple small rips in where one of my dogs got a hold of it once, just bite marks. They did ruin the riders seat but I got it reupholstered.
It could do with a set of grips as the throttle side started cracking then just ended up ripping so bit is missing off it.

Apart from the valve(s), everything else is just minor cosmetics such as the grip / panels but I just don't have the time to sort any of it out anymore have had the bike quite awhile and spent quite a bit getting it how it is so sad to see it go to be honest but needs must!
At the moment i've stripped it down to get access to take the rocker cover off which i've just bolted back on but left carbs tank etc off but if it's easier will pop back on for anyone if putting in a van / trailer or something
There's probably alot more i've forgot to say which if I remember i'll add on but i'm open to offers and any viewings etc
Let the pictures do the talking!
https://img127.imageshack.us/gal.php?g=p0810091519.jpg Hopefully that works if not i'll upload elsewhere

If interested pop me a PM or email to fadelvulgore[at]gmail.com
Cheers