Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Dragstar xvs 125 starting probs.

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

dogmeat
Two Stroke Sniffer



Joined: 06 May 2009
Karma :

PostPosted: 15:09 - 20 Dec 2009    Post subject: Dragstar xvs 125 starting probs. Reply with quote

When I push the start button the solenoid clicks but it takes a few pushes of the button to get the starter to move.

I had this problem before on a different bike and it turned out it was the main engine earth (black cable) to the engine. It was loose and corroded.

Could anyone tell me where the main earth cable is on the xvs 125 please.

Thanks!

(no rush, im not going to use it until the snow clears)
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 21:50 - 20 Dec 2009    Post subject: Reply with quote

do what i did to my GS500, get the starters eart, wire it directly to the bike frame..
Im sure thats what i did..maybe to battery. will look in morning.

My starter solenoid kept ticking..i thought battery may be flat, so i charged and took the car, came back, same problem!

Earthed the starter and woosh up it went!

You can use any part of the frame to earth...just get some decent wire and remove a bolt somewhere, wrap wire round bolt, washer, then botl back up.

That is the ghetto way for us cheap skates!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

dogmeat
Two Stroke Sniffer



Joined: 06 May 2009
Karma :

PostPosted: 17:17 - 21 Dec 2009    Post subject: Reply with quote

padwaxk88 wrote:
do what i did to my GS500, get the starters eart, wire it directly to the bike frame..
Im sure thats what i did..maybe to battery. will look in morning.

My starter solenoid kept ticking..i thought battery may be flat, so i charged and took the car, came back, same problem!

Earthed the starter and woosh up it went!

You can use any part of the frame to earth...just get some decent wire and remove a bolt somewhere, wrap wire round bolt, washer, then botl back up.

That is the ghetto way for us cheap skates!


Great! Thanks for that. I'll give it a go, as soon as I dig my bike out of the snow Confused
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 10 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.24 - MySQL Queries: 16 - Page Size: 35.99 Kb