honda mtx

leroypaul · L Plate Warrior Joined: 16 Dec 2009 Karma :

does any 1 no any good web pages so i can get info on them spec, mods anything ? thanks

Dibble · Scooby Slapper Joined: 17 Jul 2007 Karma :

My first bike ,all I can remember is that the ceramic washer on the water pump could be damaged and cause the engine to overheat.

last year I rode one down a green lane for 5 mins and it was surprisingly alright.

A lot were run by riding schools partly because it was hard to lock up the rear on the emergency stop.

A braided front line was a great improvement.

Is yours black and yellow or Flymo orange?

leroypaul · L Plate Warrior Joined: 16 Dec 2009 Karma :

i got a red bike with whight frame its a nice bike but i thinkim down on compreshion i now of a black and yellow 1 and i see a red 1 going round 2 do u now wot the compreshion is ment to b on a mtx ?

Blau Zedong · Banned Joined: 26 Jun 2006 Karma :

frazer1981 · Nitrous Nuisance Joined: 04 Oct 2008 Karma :

As far as i know there is no website's for the mtx125.

In terms of mods you could always look at changing the stock exhust system. On my mtx i had a "Big one" end can and even looked at getting the whole system which in the end i never. Made a little difference in power but the bike had been de-restricted in the past and was quite punchy ( for a 125 2t )

I know DEP did a silencer for the MTX125, but not 100% sure if they still do.

If you have any questions just post in the workshop as i know there a few people that have experance with MTX125's

Any pictures ?? Thumbs Up

____________________
1st bike - chunlan starway 50QF4 (SOLD) 2nd bike - 92 Honda mtx125RW-L ( In my garage awaiting some TLC)
05 Honda xl125v Varadero stolen and recovered but now a write off! Sad

07 Hyosung GTR125R

stirlinggaz · World Chat Champion Joined: 22 Jul 2007 Karma :

h,
i have a couple of mtx's.
in various states. (currently trying to rebuild the bottom end on a 200 atac version)
i'll have a look in my wsm (official honda by the way Cool

) & let you know what the compression should be, as i cant remember off the top of my head.
cheers,
GAZ

leroypaul · L Plate Warrior Joined: 16 Dec 2009 Karma :

i am on a mobile phone so wen i get to a pc i will up load sum pics thanks

stirlinggaz · World Chat Champion Joined: 22 Jul 2007 Karma :

If you have a trawl through the list of manuals at the start of this section, you should find a link to the wsm.
(megaupload, iirc)
cheers,
GAZ