 jambo125 L Plate Warrior
Joined: 03 Jan 2010 Karma :  
|
|
 Vincent Banned

Joined: 16 Oct 2006 Karma :    
|
 Posted: 15:45 - 09 Feb 2010 Post subject: |
 |
|
Does the cable have 3 ends? If so, you're going to need to adjust the oil pump and you don't want to get that wrong.
You'll need to undo the throttle control - usualy two screws holding the switchgear on.
Remove the top of the carb - be very careful with the jet needle when you remove the slide, don't knock the tip.
And remove the oil pump cover to get the old cable off.
If you have pics of all of these, i could be more precise. |
|